The following pictures show the amazing results that can be achieved with a badly stained and pitted Travertine floor. Covering an area of approximately 40m2 the tiles had been laid four years earlier in the Kitchen and Hallway of a house in Helmdon Village. The sealer had since worn off and dirt had become ground into the pores of the stone making it very difficult to clean effectively. Travertine does look amazing but does need to be sealed to keep it looking that way.
Cleaning a stained Travertine tiled floor
The floor was cleaned using a combination of Tile Doctor Burnishing Pads and Tile Doctor Pro-Clean with a stiff brush to clean out embedded soil in the tile pits and grout lines, I also carried out some repairs to missing grout along the edges and around the oak beams to match the existing colours.
The Burnishing pads are applied individually to each tile in sequence starting with acoarse pad and finishing withthe fine pad. The floor is rinsed in-between each pad and the resulting residue extracted from the floor using a wet vacuum. The pads are encrusted with diamonds and are ideal for bringing back the finish of stone surfaces like Travertine.
Sealing a Travertine tiled floor
Before leaving for the day the floor was given a final rinse with water and as much water and moisture as possible was extracted from the floor using the wet vacuum. When we returned the next day the floor had dried and we were able to apply the sealer. On this occasion we used Tile Doctor Colour Grow was applied to both the Travertine tiles and the grout lines, not only will this protect both the tile and grout from staining Colour Grow also enhances the natural colour and beauty of the stone.
“Phil was at all times pleasant to talk to, professional in his approach and accommodating of our needs. Worked very well. Richard , Helmdon”