Putting the shine back on Travertine floor tiles in Durham

Posted on August 18, 2017 by AbzDominise

It can be very frustrating to put effort into regularly cleaning natural stone floor tiles without achieving effective, long-lasting results. This recent customer of mine, who lives in the beautiful city of Durham in north east England, had attempted to maintain the appearance of her Travertine tiled living room floor but it had, nonetheless, become dull and lifeless in many areas.

Travertine Floor in Durham Before Cleaning

The customer’s choice to use a steam mop regularly had caused more harm than good, as the steam damaged the sealer and exposed the stone to ingrained dirt and stains. I was asked to restore the floor back to its original condition and provide advice on the correct cleaning techniques and products for aftercare.

Cleaning a Dirty Travertine Tiled Living Room Floor

To begin the restoration, I used our Tile Doctor burnishing system, which consists of applying four different diamond encrusted pads to restore the sheen to the stone and rid it of any dirt. Starting with a Coarse grit pad to grind away the dirty layer, I subsequently moved on to the Medium and Fine grit pads to gradually polish the floor. Each pad is applied with water to help lubricate the process and the resultant soil is rinsed off after each pad application.

Next, I cleaned the grout carefully using Tile Doctor Pro-Clean with a stiff grout brush, Pro-Clean is a strong alkaline cleaner that works really well on grout. The floor was left to dry overnight.

Returning the following day, I applied the fourth and final burnishing pad which is a Very Fine 3,000 grit to achieve the best possible sheen. Water is liberally spayed onto the tile during the application of the last pad in what we call a Spray Burnish action.

Sealing a Travertine Tiled Living Room Floor

The final step of the restoration was to seal the tiles. I did this using two coats of Tile Doctor Colour Grow, our impregnating sealer which not only protects the stone, but also rejuvenates its appearance and colour. I then gave the floor another quick buff with a white buffing pad for good measure.

After completing the work, I gave the customer some advice on aftercare. I recommended that she use Tile Doctor Stone Soap in combination with warm water for future cleaning as it is not only reliable, but also helps to maintain the natural patina of the stone. The solution should be gently mopped onto the floor.

Travertine Floor in Durham After Cleaning

As you can see from the after photos, the work made a huge difference to the appearance of the Travertine tiles and the customer was very happy with the finished result.

Source: Travertine Tile Cleaning and Polishing Service in Durham

Removing Wax and Polishing Travertine Tiles

Posted on March 15, 2017 by AbzDominise

Travertine is a distinct and characterful stone that makes for some truly beautiful tiled floors. However, like any natural stone the main difficulty with Travertine tiles is keeping them looking fantastic and unfortunately without regular maintenance its appearance can decline over time.

This customer, who lives in Bury, contacted me for this exact reason. For the past decade, she had attempted to keep her Travertine floor clean by using some kind of wax polish, only to find that this actually made maintenance more difficult, the wax built up in layers and was difficult to remove.

Travertine Tiled Floor Before Cleaning Bury

I visited the property to conduct a test clean and determine the kind of results I could achieve through restoring the entire floor. The customer was very impressed with the small area I cleaned and booked me in on the same day to complete the full job.

Cleaning a Travertine Tiled Floor

As a result of my successful test clean, I already knew that the best process to restore the tiles was burnishing. This involves the application of different grades of diamond encrusted burnishing pads to strip away dirt and staining, and gradually polish the stone to achieve a quality shine.

Normally on Travertine tiles I would start by applying the Coarse 400 and Medium 800 grit pads, followed by moving up to Fine 1500 and Very Fine. In this particular case, I started by using a Very Coarse 200 grit burnishing pad to strip off the wax coating and old sealers from the tiles. The pad was fitted to a rotary machine and lubricated with a small amount of water.

After finishing with the 200-grit pad, I removed all soiled water with my wet vacuum. There were still few areas of wax left in the corners of the room, and on these areas, I used a 200 grit handheld burnishing block.

When I finished with first round of burnishing, I repeated the exact same process with the 400, 800, and 1500 grit pads, rinsing away the soil in between until I was left with a high quality polished finish right across the floor.

Travertine Tiled Floor During Polishing Bury

After completing the burnishing, I filled a number of small pitted holes in the stone using a beige flexible epoxy-based grout to match the rest of the floor. I then left the floor to dry until the next day.

Sealing a Travertine Tiled Floor

The next day I returned to the property and used a damp tester to make sure the floor was dry enough for sealing. Usually with polished tiles this isn’t a problem, but sometimes the grout can be an issue. Luckily, there weren’t any issues with dampness.

Before sealing I went over the floor again using the Very Fine grit pad with a tiny amount of water as lubricant. Finally, I sealed the floor with our impregnating sealer known as Tile Doctor Colour Grow. The sealer penetrates the stone and enhances the natural colours and patterns in the stone. I polished off any excess sealer with several cotton cloths.

Travertine Tiled Floor During Sealing Bury

To make sure the floor was in pristine condition I went over the floor for a final time with the Very Fine grit pad to smoothen the surface after sealing.

Travertine Tiled Floor After Cleaning Bury

The customer was extremely pleased with the result, and even promised to recommend me to her daughter to clean and seal her Marble tiled floor. I also left her a free bottle of Tile Doctor Neutral Tile Cleaner to help her ensure the floor stays beautiful, we recommend Neutral Clean for the regular cleaning of sealed floor as most supermarket cleaners are acidic and will reduce the life of your sealer over time.

Source: Travertine Tile and Grout Cleaning and Polishing Service in Greater Manchester

Removing Lippage from a Polished Travertine Floor

Posted on February 23, 2017 by AbzDominise

The customer, who lives in Swansea, the second largest city in Wales after Cardiff, had been searching for a company to rectify the problems with his Travertine tiled floor for a few months with no luck. Fortunately, he discovered Tile Doctor online and as their local agent I was asked to assess the problems first hand.

Uneven Travertine Floor Before Levelling and Polishing in Swansea

Upon my inspection, I was quite astounded by the way the Travertine floor had been installed. It covered an around 60 square metres and suffering severe lipping of 2-3 mm in some areas between tiles. Lipping occurs when you have variation in the height of adjoining tiles, and it can be quite a trip hazard.

The floor was laid in September 2016 on a new screed, so I knew there would be no damp issues. I checked the spare tiles the customer had in surplus and determined they were 13mm thick so the solution I proposed was to grind down the tiles by 2-3mm using coarse diamond encrusted milling pads and then restore the polish with a set of fine burnishing pads. You can only do this with natural stone and given the tiles were 13mm thick it shouldn’t present a problem.

Levelling an Uneven Travertine Tiled Floor

I used a set of Tile Doctor milling pads, starting with the 50 grit Extra Coarse pad to remove the lippage throughout the whole floor. It was a large area and with 2-3mm to grind off the tile it took four days nearly three pads to complete.

Uneven Travertine Floor During Levelling and Polishing in Swansea

I then used the 100-grit coarse pad to further smooth the surface the 50-grit pad had etched, followed by the 200-grit pad to refine the finish even further. After every pad application, I rinsed and vacuumed and the area to remove the slurry.

Restoring the Polish on a Travertine Tiled Floor

After removing the tile lippage, I knew that the floor would be a lot easier to polish using our set of four Tile Doctor burnishing pads, which would do the job of restoring the desired polish. I started with the Coarse 400 grit pad and worked my way through the system of burnishing pads using a little water to help lubricate and rinsing away the slurry between each pad. The pads were applied in sequence from Medium, Fine and then Very Fine pads to achieve a fantastic polished finish.

Next, I needed to fill a lot of cavities remaining in the stone. I did this filling after the burnishing to avoid the filler coming loose during the work in progress.

Sealing a Travertine Tiled Floor

The final step in the restoration process was to seal the floor using our impregnating sealer, known as Tile Doctor Colour Grow. I highly recommend this product for stone as it not only does add durable protection by occupying the pores in the stone it also enhances it’s natural colours.

Finally, I removed any surplus sealer with a cloth and left the floor to dry for another hour, before using the Very Fine pad to refine the polish and ensure that no smears were present.

Uneven Travertine Floor After Levelling and Polishing in Swansea

The work took eight days to complete and both myself and the customer were delighted with the results of the restoration of the floor which was a total disaster to look at when I first inspected it. The customer thought it was beyond repair – until he found Tile Doctor.

Source: Travertine Tile and Cleaning and Sealing Service in SE Wales

Dealing with a Pitted Travertine Tiled Floors

Posted on February 7, 2017 by AbzDominise

The following pictures show the amazing results that can be achieved with a badly stained and pitted Travertine floor. Covering an area of approximately 40m2 the tiles had been laid four years earlier in the Kitchen and Hallway of a house in Helmdon Village. The sealer had since worn off and dirt had become ground into the pores of the stone making it very difficult to clean effectively. Travertine does look amazing but does need to be sealed to keep it looking that way.

Travertine Kitchen Tiles Before Cleaning Helmdon

The first few photos show the floor before any cleaning was undertaken and the customers kitchen units which we had wrapped to protect against any splashing. We always take great carewhen working in peoples homes to avoid any damage and we advise that as much furniture as possible is removed from the area to be cleaned. In this case the client was unable to move the large table as they had nowhere to store it fortunately we carry specialist furniture sliders to allow us to move furniture backwards and forwards during cleaning so were able to work around it.

Travertine Kitchen Tiles Before Cleaning Helmdon Showing Pitting

Cleaning a stained Travertine tiled floor

The floor was cleaned using a combination of Tile Doctor Burnishing Pads and Tile Doctor Pro-Clean with a stiff brush to clean out embedded soil in the tile pits and grout lines, I also carried out some repairs to missing grout along the edges and around the oak beams to match the existing colours.

The Burnishing pads are applied individually to each tile in sequence starting with acoarse pad and finishing withthe fine pad. The floor is rinsed in-between each pad and the resulting residue extracted from the floor using a wet vacuum. The pads are encrusted with diamonds and are ideal for bringing back the finish of stone surfaces like Travertine.

Travertine Kitchen Tiles During Cleaning Helmdon

The picture above should give you an idea of the machinery required to achieve professional results.

Sealing a Travertine tiled floor

Before leaving for the day the floor was given a final rinse with water and as much water and moisture as possible was extracted from the floor using the wet vacuum. When we returned the next day the floor had dried and we were able to apply the sealer. On this occasion we used Tile Doctor Colour Grow was applied to both the Travertine tiles and the grout lines, not only will this protect both the tile and grout from staining Colour Grow also enhances the natural colour and beauty of the stone.

Travertine Kitchen Tiles After Cleaning Helmdon

The owner of the property was very happy with the result and left the following comment on the Tile Doctor feedback system, I always appreciate it when clients take the trouble to do that.

“Phil was at all times pleasant to talk to, professional in his approach and accommodating of our needs. Worked very well. Richard , Helmdon”

Travertine Kitchen Tiles After Cleaning Helmdon Close-Up

Source: Travertine Tile Cleaning & Restoration Service in Northamptonshire

Dealing with a Pitted Travertine Tiled Floor in Frome

Posted on January 16, 2017 by AbzDominise

Pitting, which can be described as a natural form of corrosion that occurs on stone such as Travertine, can be a big problem for property owners with tiled floors. This is because the corrosion causes lots of small holes to form in the stone; without proper protection in place, these holes can quickly become ingrained with dirt. To make things worse many supermarket cleaning products are acidic and overtime they can eat into the stone making the problem worse.

Without the right maintenance and adequate sealer in place Pitted Travertine will be very difficult to keep clean and this was the problem that had affected the Travertine tiled floor of one of my customers in the town of Frome; a Somerset market town packed with interesting architecture and historic buildings.

Pitted Travertine Tiled Floor Before Cleaning Frome Somerset

Cleaning a Pitted Travertine Tiled Floor

I travelled to the property to see what could be done to resolve the situation and I could immediately see the very noticeable problem was related to dirt that had become ingrained into the stone and grout, a problem that covered a large area from the kitchen to the dining area.

To deep clean the floor I set about applying a strong dilution of Tile Doctor Pro-Clean, which is our go-to alkaline cleaner for natural stone. I left it to soak for ten minutes before scrubbing it into the stone and grout paying focus to the individual pits to soften and help dislodge the ingrained dirt. The soiled cleaning solution was rinsed off with water using a wet vacuum to extract it from the floor.

I then used Tile Doctor’s set of four diamond encrusted burnishing pads. Each pad was fitted to a rotary floor machine and applied with a little water to help lubricate. In our system, we start with a Coarse grit pad to remove old sealers and dirt and gradually work our way through to Medium, Fine and Very Fine grit pads to achieve a high quality polished finish.

It was a large area so it took most of the day to completely burnish the floor and once finished I filled the larger pits with a matching resin which will improve the overall appearance of the floor and minimise the issue of dirt becoming ingrained.

Sealing a Pitted Travertine Tiled Floor

The Travertine tiled floor was then left to dry out fully before I could return to seal it though next day. We typically allow for at least 24 hours, unless there are any inherent damp issues.

My sealer of choice here was Tile Doctor Colour Grow, which is an impregnating sealer designed to enhance colour and protect he stone. It does this by penetrating the pores to fill them and therefore prevent dirt becoming trapped – which had been the major problem with these tiles to begin with.

Pitted Travertine Tiled Floor After Cleaning Frome Somerset

The photos below show a complete transformation. As you can imagine, the owners were thrilled with the finished floor.

Source: Travertine Tile Renovation and Restoration Service in Somerset

Neglected Travertine Tiles Restored in Newton-Heath

Posted on January 13, 2017 by AbzDominise

This customer in Newton Heath, just outside of Manchester, used to have a beautiful polished travertine floor on most of the ground floor and bathroom but over time it was getting duller and duller as the polish became worn down, not helped I might add by their choice of cleaning products which were not appropriate for this type of floor. Additionally, numerous cracks and holes had appeared in their floor and worried it was going to get worse they decided to call in some professional help and get the whole floor fully restored.

Travertine Tiled Floor Before Cleaning and Sealing Newton Heath

When I got the call I went over to the house to take a in-depth look at the problem and recommended that the floor was burnished using diamond pads of different grades. They also asked if I could apply the same treatment to the travertine bathroom floor and shower cubicle as well, which I was very happy to do so we agreed a price and scheduled a date to do the work.

Travertine Kitchen Floor Before Cleaning and Sealing Newton Heath

Dull Travertine Floor Cleaning/Polishing

To start the burnishing process, I applied the Coarse 400 grit burnishing pad to the floor using rotary machine and water as lubrication to break down and remove any old sealer from the stone. When finished with first burnishing pad I removed all the soiled water left on floor with a wet vacuum. This removal process of soiled residue was repeated after each use of a burnishing pad.

Next, I moved on to the Medium 800 grit pad which is less coarse, but still rough enough to break down layers of ingrained dirt. I followed this up with the application of a Fine 1500 grit pad, which started to smooth down the rough areas of the surface to prepare the floor for a final polish with 3000 grit. However before moving straight on to the final of the four pads, I took the time to carefully fill in the all the small cracks and holes in the stone, before leaving the floor to dry until the next day.

Sealing Travertine Floor

The next morning, I returned to the property to finish off the floor restoration. As soon as I arrived I used a damp tester to make sure the floor was completely dry.

All was well so I went over the floor with the final Very Fine 3000 grit burnishing pad, this time without any water lubricant, to finally achieve a high quality polished finish.

For polished floors, we recommend the use an impregnating sealer that penetrates the pores of the stone rather than sitting on the surface of the floor, as this ensures the quality of the polish isn’t damaged. With this in mind I applied Tile Doctor Colour Grow to seal the tiles. This is a colour enhancing sealer that provides durable surface protection and allows the surface to breathe whilst enhancing the natural colours in the stone. At this point it’s important that any sealer that doesn’t penetrate the stone is removed by polishing it off with a cloth.

Travertine Tiled Floor After Cleaning and sealing Newton Heath

After this I went on to repeat the cleaning, polishing and sealing process on their Travertine Tiled shower cubicle but I’ll detail that in a separate post.

Needless to say, the customer was very happy with the work carried out on the floor and shower cubicle and recommended me to his neighbour straight away.

Travertine Bathroom Floor After Cleaning and sealing Newton Heath

Source: Travertine Tile Renovation and Restoration Service in Greater Manchester

Pitted Travertine Kitchen Tiles Refurbished in Lincolnshire

Posted on January 6, 2017 by AbzDominise

Quite often our customers will be new property owners who have inherited fantastic tiled floors that are in need of smartening up. Typically the previous owners struggled to maintain the floor which is not unusual when it comes to high quality natural stone such as Travertine and this was the case with this Travertine tiled floor that I recently restored at a property near Woodhall Spa, on the southern edge of the Lincolnshire Wolds.

Travertine Tiled Floor Near Woodhall Spa Before Cleaning

The customer not only needed a deep clean for the tiles and grout which had become dirty and discoloured over time, but also needed for many of the small holes caused by the natural process of pitting to be filled to give the Travertine tiles a smooth and polished finish. Finally, the floor would need a fresh seal to protect it and make it easier to cleangoing forward.

Cleaning and Repairing a Pitted Travertine Tiled Floor

To begin the restoration, I applied Tile Doctor Pro-Clean to the floor, which is our reliable high alkaline cleaner designed for use on stone floors, left it to soak in and break down the dirt and then used our hot pressure Rotovaccleaning system to clean the tiles. The Rotovac is an expensive machine but makes light work of the job by deep cleaning and scrubbing the stone whilst rinsing and extracting away all of the soiled cleaning residue at the same time. It allows us to get deep into the pores of the tile and grout to eradicate ingrained dirt and stains.

I then worked through our four-stage diamond encrusted burnishing pad system which hones and polishes the surface of the tiles with excellent results. Each of the four pads is applied in turn, moving from a coarse grit all the way to a Very Fine grit.

Once I was happy with the condition of the floor it was time to deal with the holes in the Travertine by applying a two-part colour matched resin to fill the small and large holes mentioned earlier.After completing the cleaning and filling was completed I left the tiles to dry off completely overnight aided with air movers to speed up the drying process.

Travertine Tiled Floor Near Woodhall Spa After Cleaning

Ensuring the floor is bone dry before sealing is important as I needed to seal the tiles the next day, and a small amount of excess moisture can cloud the sealer and damage its performance.

Sealing a Travertine Tiled Floor

When I came back the next day I tested the floor for moisture to confirm it was dry before applying two coats of Tile Doctor Colour Grow, which is an impregnating sealer that intensifies and enhances the natural shades in the Travertine while also providing it with protection against dirt and stains.

With the restoration complete I left the customer with a bottle of Tile Doctor Neutral Tile Cleaner for regular future maintenance, along with an aftercare leaflet. We recommend this product for the regular cleaning of sealed tiles as the neutral pH will help to maximise the life of the sealer and not erode it like many acid cleaning products.

I think you will agree the floor now looks much better, certainly the customer was very happy with the work and left the following feedback:

“Phil and his colleague worked their magic to transform our tired looking, grimy Travertine floors into bright, shiny new look floors. Thank you so much.”

Source: Travertine Tile and Grout Cleaning and Polishing Service in Lincolnshire

Burnishing Travertine Tiles in Northamptonshire

Posted on December 5, 2016 by AbzDominise

Travertine is a highly coveted and popular choice for tiled floors – and it’s easy to see why. At peak condition, it’s one of the most beautiful and eye-catching types of tile that is available. However, the appearance of the stone tends to suffer heavily from a natural process of corrosion know as pitting, which results in small holes developing that easily fill up with dirt and muck over time. This ingrained dirt is particularly difficult to remove with domestic, supermarket-quality cleaning products.

This customer, who lives in Staverton, near Daventry in Northamptonshire, was very concerned that his Travertine tiled floor had lost its former lustre and shine due to pitting issues, continued foot traffic, and the fact that the sealant has lost its performance over the last few years and hadn’t been topped up. Dirt had therefore been allowed to penetrate both the grout and stone making it look dull and uninviting.

Travertine tile before burnishing Steverton

A quote was issued and accepted to restore the floor to its former glory. It was agreed the work would best be carried out whilst the customer was away on a short break with his family.

Burnishing and Cleaning a Travertine Tiled Floor

I decided the best course of action to bring the floor back to its former glory would be to hone and polish the stone with Tile Doctor diamond encrusted burnishing pads. Our burnishing process involves removal of a very thin layer of the top surface of the stone using four pads of different grits.

The first pad has a Coarse 400 grit. It is attached to a rotary machine and, with only water for lubrication, removes minor scratches, sealers, and the top surface dirt. Working in small areas of four-six square metres each, I applied the pad across the the entire floor, rinsing in between eras and picking up the soiled solution with a wet-vac machine.

I then repeated this same procedure with the second pad, which is a Medium 800 grit pad used to remove dirt from minor scratches and holes in the stone. Next, I mixed up some Tile Doctor Pro Clean and sprayed it on the grout lines, which were only lightly soiled, and used hand brushes to clean them. The next burnishing pad I used had a Fine 1500 grit, which is used to start the polishing process.

Following the application of the first three pads, I stopped to allow the area to dry overnight. To get the best results with burnishing, it is best that the tiles are dry as otherwise you won’t achieve the highest level of shine possible. Returning the following day, I proceeded to apply the final Very Fine 3000 grit burnishing pad to achieve a very high quality polished finish.

Sealing a Travertine Tiled Floor

Once the burnishing process was completed, I applied two coats of Tile Doctor Ultra Seal to seal the tiles. Ultra Seal is a no-sheen, natural look impregnating sealer designed to provide maximum protection against dirt and stains. The second coat was allowed to dry for an hour before I re-polished the entire floor with a very fine 3000 grit pad to refine the polish even further.

The fantastic results can be seen in the photos below.

Travertine tile after burnishing Steverton

The customer was very happy with the result, leaving the following feedback:

“Just wanted to thank you for an excellent job in cleaning and returning our dining room and kitchen floor to its former glory. It looks fantastic! The floor definitely benefits from a more honed/polished finish.”

It’s always nice to get feedback like that, it really does make your efforts feel appreciated.

Source: Grout Cleaning and Colouring Service in Northamptonshire

Restoring the Appearance of Polished Travertine Tiles in Didsbury

Posted on November 3, 2016 by AbzDominise

While popular and highly coveted due to its natural brown colouring, Travertine is not as tough as other types of natural stone and thus needs regular maintenance if you wish to keep it looking good. Without it the polish can quickly dull, and can suffer from erosion over time if acidic cleaning products are used often resulting in small holes or pitting appearing.

This house in the Manchester suburb of Didsbury had a particularly large area of Travertine tiles which had proven to be very difficult for the property owner to maintain. When I spoke to her I explained that Tile Doctor have a reliable process for the restoration of Travertine and similar types of natural stone such as Marble and Limestone using a polishing process we have developed called burnishing, and I assured her that we could achieve the same with her floor.

Travertine tiled floor before polishing in Didsbury

Cleaning and Polishing Travertine Tiles

Tile Doctor’s burnishing system involves the application of four different diamond encrusted burnishing pads in sequence from coarse to fine, using a small amount of water with each pad for lubrication.

I started work on this Travertine by applying a Coarse 400 grit burnishing pad to strip away dirt and any old sealer remaining on the tiles, before removing any dirty water with a wet vac machine and rinsing the floor (a process which is repeated after the application of each pas). Next, I moved on to the Medium 800 grit pad, which I used to break down any ingrained dirt and stubborn marks, and to start smoothing down the rough and uneven surface that had developed on some of the tiles. I then used the Fine 1500 grit pad to smooth the surface even further and get the floor ready for its final polishing.

However, before applying the fourth and final pad, I took the time to carefully fill all the cracks and holes as these were spoiling the overall appearance of the tiles. Following this I left the floor for the day so it could dry off fully overnight.

Sealing Travertine Tiles

I returned to the property the next morning to seal the floor. My first course of action was to run a damp test; which we do in every situation as even a small amount of damp threatens to spoil the sealer. The test did reveal some damp spots, so I used my heat gun to dry them out quickly.

Once the floor was completely dry, I went over the floor with the Very Fine 300 grit pad, without any water as lubricant this time, to achieved the final desired polish. In this situation, I used Tile Doctor Colour Grow to seal the tiles as I knew it would enhance the natural shades in the Travertine. Colour Grow is a solvent based colour intensifying sealer that provides durable surface protection while allowing the surface to breath and enhance colour.

It’s really important that all excess sealer – that which doesn’t penetrate the stone – is polished off. For polishing off the excess, I used our three cloth system. After completing the sealing process, I went over the floor one final time with the Very Fine 3000 grit diamond burnishing pad to ensure a smooth and shiny finish.

Travertine tiled floor after polishing in Didsbury

Needless to say, the customer was very happy with result, remarking that the floor never looked that good before!

Source: Travertine Cleaning and Polishing Service in Greater-Manchester

Repairing Scratches on a Polished Travertine Floor

Posted on October 25, 2016 by AbzDominise

Travertine, a form of Limestone, is a highly coveted stone that had been in use as a building and flooring material for hundreds of years. In fact, the Romans used Travertine to build the famous Colosseum, the largest building in the world that was built primarily from the material.

It is understandable, then, that anyone who owns a Travertine tiled floor would want to ensure its regular cleaning and maintenance, especially given that Travertine is a relatively soft stone in comparison with other stone, is easily damaged and is naturally pitted. This customer, who lives in the town of Hunt in Berkshire, was keen to have her Travertine tiles deep cleaned, several deep scratched removed and for the pitted holes to be filled.

Scratched travertine tiled floor before cleaning in Hunt

Burnishing and Cleaning a Scratched Travertine Tiled Floor

To clean the Travertine floor, I firstly used a hot clean and capture system, which essentially involves the application of hot water to the floor under high pressure. The system then captures the dirty water and transports it back to a tank on our van. It’s a highly efficient method for cleaning large areas in a short space of time, with great results.

Next, I treated the pitted holes in the Travertine were filled with a coloured matched resin. Pitting is a form of corrosion that occurs naturally in this type of stone, and can be quite unsightly if not treated. Additionally, it’s not unusual for pitting to be made worse by the constant use of weak acid cleaning products which can actually erode the calcium in the stone.

As mentioned, the tiles also suffered from deep scratches in parts, and these were removed using a process we call burnishing, which involves the application of diamond encrusted pads to polish the stone. The scratches were polished out using Coarse 100 and 200 grit diamond pads.

Scratched travertine tiled floor repaired in Hunt

The whole floor was then burnished using the four pad Tile Doctor burnishing system, starting with a Coarse pad and working through Medium, Fine and Extra Fine pads, with rinsing in between each pad and a final rinse at the end of the process.

I left the floor to dry off fully and retuned later to enhance the polish further using Tile Doctor Shine Powder, a crystallising powder product which provides a very durable and deep shine on the Travertine.

Sealing a Travertine Tiled Floor

Having successfully dealt with all the problems affecting the Travertine, my last job was to seal the whole floor using Tile Doctor Colour Grow. Colour Grow is an impregnating, colour enhancing sealer that we recommend highly on quality stone such as Travertine, Limestone, and Marble due to the fact that it provides excellent protection and emphasises the wonderful natural shades in the stone.

Scratched travertine tiled floor after restoration in Hunt

The customer was extremely happy with the results and sent over the following feedback for Dennis who worked on the floor:

“Dennis was brilliant – very professional and conscientious – he worked so hard and in 30+ degree temperatures! He has rejuvenated our Travertine flooring to a beautiful, almost mirror like effect – it is now more amazing than it was when it was first laid down.”

Source: Travertine Floor Cleaning and Polishing Service in Berkshire

Polishing a Pitted Travertine Tiled Floor in Hampshire

Posted on October 17, 2016 by AbzDominise

To restore high quality, polished stone such as Travertine, Marble, and Limestone, we find that the most effective method is to use a process known as burnishing.

It involves the application of specialist diamond encrusted pads of different grits in sequence. The pads with coarser grits grind down out soil buildup, while the subsequent application of finer grit pads gradually hones an aesthetic polish on the surface of the tiles. Tile Doctor’s system consists of four burnishing pads: Coarse, Medium, Fine and Very Fine.

We use burnishing in these types of floor because we find that liquid cleaning products alone do not always achieve the best results. In fact, some household cleaning products can be damaging it not used correctly.

One customer of ours, who lives in Andover which is west of Basingstoke, was having a particularly difficult time keeping her pitted Travertine tiled floor clean, leaving them looking exceptionally dirty and dull and we were asked to restore their appearance.

Pitted travertine floor tiles before cleaning in Andover

Burnishing a Dirty Pitted Travertine Tiled Floor

As mentioned, to restore travertine we find the best method to be burnishing which has the added advantage of tightening up the pores in the stone, creating a natural sheen before any sealer is even applied.

To undertake the burnishing, I used our four pad system, polishing the Travertine with each pad in sequence – starting with the Coarse pad and ending with the Very Fine pad. This achieved a nice, even satin finish, which was ideal because the customer did not want a high shine gloss.

With the stone tiles cleaned and polished, I turned my attention to the grout, which was similarly dirty. To clean this, I opted for a liquid product in the form of Tile Doctor’s high alkaline cleaner, Pro Clean. I applied and scrubbed the product into the grout to eliminate ingrained dirt and stains, before rinsing the whole floor, using a wet-vac machine to remove the dirty cleaning residue, and leaving it to dry.

Sealing a Pitted Travertine Tiles Floor

Once the Travertine tiles were dry, I gave them a final polish in preparation for sealing. My choice of sealer was Tile Doctor Colour Grow – our impregnating, colour enhancing sealer for Travertine, Marble and Limestone. As you can see from the photo below, the sealer really lifted the natural shades in the stone. Both myself and the customer were really pleased with the overall result.

Pitted travertine floor tiles after burnishing in Andover

A bottle of Tile Doctor Stone Soap was left with my very happy customer along with instructions for aftercare. We recommend Stone Soap for the regular cleaning of polished Travertine as it enhances the natural patina in polished stone.

Source: Travertine Tile Cleaning and Polishing Service in Hampshire

Deep Cleaning Travertine Floor Tiles in Oundle

Posted on September 27, 2016 by AbzDominise

Although at first glance this Travertine tiled floor in Oundle appeared to be in decent condition, upon closer inspection however it became very clear that it was suffering from significant pitting issues and had become very dull for a polished stone. While they can’t necessarily be seen in the photographs, the floor had hundreds of small holes across the entire area, along with a few hairline settlement cracks in a few particular tiles.

It is natural for Travertine to become pitted and for small holes to appear over time. To give the stone a smooth appearance these holes are filled at the factory; however, in high traffic areas such as kitchens and living rooms these fillers pop out and the holes quickly fill with dirt and grime, making the floor grubby and difficult to clean.

Needless to say the property owner was keen to have the Travertine restored as quickly as possible to avoid the situation becoming worse.

Cleaning a Travertine Tiled Floor

To begin the restoration, I needed to clean the whole floor to remove the dirt and muck that had become ingrained in the Travertine. I did this using our reliable high alkaline cleaner known as Tile Doctor Pro Clean, which I applied liberally and worked into the stone using the Tile Doctor diamond burnishing pad system, paying special attention to the grout lines.

There are four pads in the system and each burnishing pad is fitted to a rotary machine and ran across the floor in sequence starting with the coarse pad and finishing with the fine pad using a little water to help lubricate.

Pitted travertine during cleaning Oundle

Before applying the final polishing pad, I went round on my hands and knees and filled all the holes and cracks with an appropriate colour filler which did take some time to complete.

Sealing a Travertine Tiled Floor

After allowing the new filler to dry overnight, I returned to the property to polish off any excess by hand with a cloth. Following this, I gave the tiles a final polish with the Very Fine diamond encrusted burnishing pad which gave the floor a uniform polished finish.

To protect the floor in the future the last step was to apply a fresh sealant in the form of Tile Doctor Colour Grow, a fanatic product for high-end tiles like Travertine, Limestone and Marble. Colour Grow is a colour enhancing, impregnating sealer which fills the pores in the stone to prevent trapped dirt and also emphasises the natural colours and shades in the process.

The tiles were then left to dry for two hours. I then opted to test for water repellency to check the sealant would provide adequate protection, with a successful outcome. The final picture below shows the finished results: clean, well-protected Travertine tiles with improved sheen.

My customer was very pleased to have the pitting problem resolved, while also having the floor deep cleaned and sealed and left the following testimonial on the Tile Doctor feedback system.

Phil did an amazing job of repairing the holes and cracks and cleaning the pale coloured grout, which now looks like new. Lovely transformation. I have tried the Tile Doctor Stone Soap and this has given the floor a deep shine. I would gladly recommend Tile Doctor to anyone. Sonia A, Oundle

Source: Travertine Tile Cleaning and Maintenance Service in Northamptonshire

Maintaining And Polishing Travertine Tiles in Lincolnshire

Posted on August 2, 2016 by AbzDominise

This fantastic Travertine tiled kitchen floor was in a bad way. Not only had it not been treated to a proper clean and seal in a long while, but it has also suffered from natural pitting, leaving lots of little holes that damaged the overall appearance of the floor. Travertine is very aesthetic, but suffers from the drawback of being quite soft compared to other types of stone (typically it sits between 3-4 on the Moh’s scale of mineral hardness).

The customer, who lives in the town of Sleaford a small Lincolnshire market town, was keen to have the situation remedied through a complete restoration. This would need to include small repairs, along with a deep clean and a fresh seal.

Travertine Floor Before Refurbishment Sleaford

Cleaning and Burnishing a Travertine Tiled Floor

My first job was to deep clean the whole area, which I did using a solution of Tile Doctor Pro Clean and clean water. Pro Clean is a strong alkaline product which has a long history of producing reliable results of a wide range of natural stone floors, including Travertine, Granite, Limestone, and Slate. I applied the solution to both the tiles and the grout lines, and proceeded to scrub it in using a scrubbing pad fitted to a rotary floor machine.

This left the floor fresh and clean, but I would also need to restore the polish to the Travertine to really take its appearance to the next level. To do this I used the process known as burnishing, which essentially involves the consecutive application of different gritted pads to achieve a high quality polish on tiles. Our burnishing system, which consists of four pads, achieves fantastic results on high-end polished stone like Limestone, Marble and, of course, Travertine. I started by applying the Coarse grit burnishing pad, before gradually working my way through to the Medium, Fine, and finally Very Fine pads to achieve a brilliant shine and light reflection finish.

To round off the first day of the restoration, I used a flexible matching filler to fill up any pitted holes present on the surface of the tiles. Following this, I installed a turbo dryer to make sure the floor would dry fully overnight, and be ready to seal the following day.

Sealing a Travertine Tiled Floor

The next day I returned to the property and proceeded to seal the Travertine tiles using several costs of Tile Doctor Colour Grow sealer to protect the tiles and also really enhance the natural colours in the stone. As an impregnating sealer, Colour Grow penetrates into the stone and fills its pores to safeguard it against ingrained dirt and stains from within.

Travertine Floor After Refurbishment Sleaford

As you can see from the photographs, the combination of a deep clean, high quality polish and fresh seal really transformed the appearance of the floor from dull and lifeless to a really asset to the kitchen. The customer was absolutely delighted with the results, leaving the following feedback: “Very good job – delighted! Thank you Phil!”

Source: Travertine Tile and Grout Cleaning and Sealing Service in Lincolnshire

Polishing a Travertine Tiled Kitchen in Derbyshire

Posted on June 13, 2016 by AbzDominise

This customer had some real difficulty in getting their fantastic Travertine tiled kitchen area looking as good as it should. The cleaning methods they had previously employed were unable to prevent the tiles from appearing dull, and the customer was also unable to deal with the displeasing marks and small cracks damaging the stone.

Travertine Floor Before Burnishing in Ashbourne

Keen to get the floor back to looking its best, the customer called me down to their property, which overlooks the beautiful countryside area of Ashbourne, to see what could be done to restore the tiles.

Burnishing a Dull Travertine Tiled Floor

Upon my arrival at the property, I assessed the situation and resolved that the best way to restore the polish and general appearance of the floor was to use a process known as burnishing. The burnishing process, which involves the application of four diamond encrusted polishing pads of varying grit, works to grind away ingrained dirt while smoothing and polishing rough surfaces. Most commonly we use burnishing to restore the shine to Limestone and Marble tiles, but it can be used on most types of natural stone floor where a deep polish is required.

To start the process, I applied the Coarse 400 grit burnishing pad to the floor using a small amount of water as lubrication in order to break down and remove any old sealer from the stone. Once this had been done across the entirety of the floor, I removed any soiled water with a wet-vac machine; this removal of soiled residue was repeated after each use of a burnishing pad.

Next, I moved on to the Medium 800 grit pad which is less coarse than the 400 grit, but still rough enough still to break down layers of ingrained dirt. I followed this up with the application of a Fine 1500 grit pad, which started to smooth down the rough areas of the surface to prepare the floor for a final polish with an even finer burnishing pad later on. Before moving straight on to the final of the four pads, I took the time to carefully fill in the all of the small cracks and holes in the stone, before leaving the floor to dry until the next day.

Sealing a Travertine Tiled Floor

The next morning, I returned to the property to finish off the floor restoration. As soon as I arrived I used a damp tester to make sure the floor was completely dry. Noticing a number of small damp spots, I opted to use my heat gun to speed up the drying process.

Once the floor was completely dry, I used the Very Fine 3000 burnishing pad – the last of the four – without any lubricant to finally achieve a high quality polished finish. For polished floors it is recommended to use an impregnating sealer that penetrates into the pores of the stone rather than sitting on the surface of the floor, as this ensures the quality of the polish isn’t damaged.

As such I opted to use Tile Doctor Colour Grow to seal the tiles. This is a colour intensifying sealer that provides durable surface protection and allows the surface to breathe whilst enhancing the natural colours in the stone. It’s important that any sealer that doesn’t penetrate into the stone is removed by polishing it off with a cloth.

Travertine Floor After Burnishing in Ashbourne

After completing the seal, I went over the floor for a final time with the 3000 grit diamond burnishing pad to leave a smooth and shiny polished finish. Needless to say that the customer was very happy with result as they had never before been able to get the floor looking this good!

Source: Travertine Tile Cleaning and Polishing Service in Derbyshire

Travertine Floor Maintenance in Scotland

Posted on March 18, 2016 by AbzDominise

When we arrived at this property in Ayrshire, Edinburgh, it appeared as though the owner’s Travertine tiled floor was in relatively decent condition.

On closer inspection, however, we could see that the grout lines were quite dirty and, while there was still a visible shine to the surface, it had become cloudy, likely due to a lack of sufficient maintenance.

Travertine Floor Before Polishing Ayrshire

This was a big concern for the owner, and so they contacted me to see what I could do to remedy the situation.

Cleaning and Burnishing a Dirty Travertine Floor

After agreeing with the customer to undertake the work, I travelled to the property in Ayrshire, a county located in the South West of Scotland, on the shores of the Firth of Clyde.

Upon arrival, I set about using a set of large diamond encrusted burnishing pads fitted to a rotary machine to strip the tiles of old surface sealer, break down the layers of dirt, and restore the polished shine. The Tile Doctor burnishing system comprises four main pads of varying grit: I began by applying the Coarse grit pad, before moving on to Medium, Fine and Extra Fine to gradually achieve the desired level of polish.

Travertine Floor During Polishing Ayrshire

After burnishing the main surface of the floor, I used smaller, 6-inch pads to pay particular attention to the edges and corners. Then, to complete the cleaning process, I scrubbed a strong solution of Tile Doctor Pro Clean into the grout limes to remove ingrained dirt and stains. I also noticed some holes in the grout as well as some completely missing, and also promptly replaced these with new grout.

Sealing a Travertine Floor

The floor was then left overnight in order to allow it to time to dry completely. In the morning I returned to the house and opted to give the floor a final polish with the extra fine burnishing pad before sealing.

My choice of sealer was Tile Doctor Colour Grow, which was applied in two separate coats to protect the floor against wear and tear, while also accentuating the natural shades in the stone thanks to the sealer’s colour intensifying formula.

Travertine Floor After Polishing Ayrshire

I’m pleased to say that my customer’s worries about this Travertine tiled floor have now been put to rest. The results were very pleasing for both myself and the customer, and I made sure to offer some general tile maintenance advice before being on my way. Another happy customer.

Thomas Wilson
Edinburgh Tile Doctor

Source: Travertine Floor Maintenance Service in Ayshire

Repairing Cracks in Travertine Kitchen Tiles

Posted on March 10, 2016 by AbzDominise

This Travertine tiled kitchen floor had been laid around five years previously in a house in Didsbury and now most of the sealer had worn down making the floor difficult to clean effectively. This resulted in the tiles looking continually dirty and a few of the tiles had cracked which you can see in the photograph below.

Travetine Tiled Floor Before Burnishing Didsbury

Maintaining Travertine Tiles

To start off with i scrubbed Tile Doctor Pro-Clean into all the grout lines with a stiff brush in order to get them as clean as possible followed by a rinse with water which was extracted using a wet vacuum.

The next step was to strip the Travertine of any remaining sealer and dirt using a set of four Diamond encrusted burnishing pads which come in a number of grades and are applied from coarse to extra fine with a little water to help lubricate.

I used the first three pads from coarse to fine rinsing between each pad to restore the polished finish of the stone but stopped before applying the final pad so I could fill all the cracked tiles with a resin filler in a matching shade. Once the filler had dried I gave the floor a final polish with the fourth extra fine burnishing pad and gave the floor a final rinse at the end to make sure the floor was clean before sealing.

Sealing Travertine Tiles

Once the floor was dry it was sealed using a couple of coats of Tile Doctor Colour Grow which is an impregnating sealer that occupies the pores in the stone so dirt cannot become ingrained there. This particular sealer also enhances the natural colours in the stone.

Travetine Tiled Floor After Burnishing Didsbury

After the final polish and sealing the cracked areas had blended in very nicely and the customer was very pleased with the overall result.

Source: Travertine Floor Restoration Service in Manchester

Restoring the Appearance of Travertine Tiles

Posted on February 4, 2016 by AbzDominise

Here’s a job I completed recently at a house in the tiny town of Kirkby Lonsdale, situated in the South Lakeland district of Cumbria. My client had a large area of Travertine tiled flooring that was in certain need of a deep clean and reseal.

Travertine Tiled Flooring Before Cleaning Kirby Lonsdale

Additionally, the floor suffered from a number of naturally occurring holes in the Travertine. This can be quite a common problem with Travertine, due to the fact that it’s a softer material than some types of stone and I’ve often heard of holes opening up in Travertine floors over time due to the use of acidic cleaning products. These holes needed to be filled before commencing the cleaning and sealing processes which I did this on the first day using a flexible grout in a matching shade of cream/brown.

Burnishing a Travertine Tiled floor

To restore the finish on the Travertine I used a process known as burnishing rather than resorting to a form of liquid cleaner which would clean the floor but not restore the appearance. Burnishing involves the use of diamond encrusted pads in varying grits. I began with the coarse pad, and worked my way through the system with medium, fine, and lastly a very Fine pad, using water to lubricate and rinsing the floor after each pad to remove the slurry. This process left the stone exceptionally clean, and with lustre restored to the floor as a whole.

Sealing a Travertine Tiled Floor

Stone floors are porous and overtime they will collect dirt which can become ingrained into the tile and make it very difficult to clean effectively. The solution is to seal the floor and so I returned to the house on the second day to seal the newly cleaned floor. My sealer of choice on this occasion was to apply a single coat of Tile Doctor Colour Grow which is as its name suggests a colour intensifying sealant that provides durable surface protection and enhances the natural shades in the stone.

Travertine Tiled Flooring After Cleaning Kirby Lonsdale

As you can see from the photographs, the burnishing process made a great difference to the condition of the Travertine tiled flooring, not just in its appearance, but also in terms of its now polished texture.

Source: Cleaning and Maintaining Travertine Tiles in Cumbria

Restoring Cracked Travertine Conservatory Floor

Posted on January 28, 2016 by AbzDominise

Recently I worked on a house in the historic market town of Dunmow, Essex. My client had a Travertine tiled floor in dire need of some professional maintenance. Specifically, my client requested a deep clean, with special attention paid to the grouting, along with a fresh seal.

Unlike a polished stone floor – which would require a process known as ‘burnishing’ – this Travertine floor required a fairly straightforward liquid cleaning process, using some professional products to fully restore the appearance of the tiles and grouting. Here’s how I did it.

Cleaning a Travertine tiled floor

I began the cleaning process by mixing a strong cleaning solution consisting of one part Tile Doctor Pro Clean to three parts water. I applied this solution across the floor and left it to dwell for ten minutes, giving it time to seep into the stone. The solution was then more directly scrubbed into the tile using a scrubbing pad fitted to a rotary buffing machine.

Following this, I focused my attention on the grouting, cleaning it by hand using more Pro Clean, but this time worked in using stiff brushes along the grout lines.

The entire area was then rinsed with water which was then extracted using a wet vacuum, before I left it to dry overnight.

Sealing a Travertine tiled floor

Upon my return to the house the next day I checked the floor to ensure it was dry and then began to seal the tiles using two coats of Tile Doctor Colour Grow. Colour Grow is an impregnating sealer which sinks into the pores of the stone intensifying the natural colours whilst also providing durable stain protection.

Once the sealer had dried, I used a very fine burnishing pad to buff up the appearance of the floor and add an aesthetically pleasing shine.

Source: Tile, Stone and Grout Cleaning Service in Essex

Dealing With a Very Dirty Travertine Kitchen Floor

Posted on November 18, 2015 by AbzDominise

I recently completed quite a substantial cleaning job at a house in the small, historic market town of Oundle, Northamptonshire. My client had a badly stained Travertine tiled floor that ran throughout her hallway, kitchen, utility area, and toilet.

Travertine is a fantastic choice for tiled floors because it has distinct features which no other stone can offer. It’s not surprising, then, that is popularly used for both residential and commercial flooring. In this case however the appearance of the tiles had been further spoiled by dozens of holes, and my client had attempted to remedy this problem by filling some of the holes with concrete. This had left the floor looking inconsistent and certainly worse for wear.

Stained Travertine Hallway Oundle Before Cleaning

Cleaning a stained Travertine tiled floor

On day one, my first job was to address the holes marked the tiled surface. I filled the unsealed holes with matching filler, before re-colouring the concrete that had been previously used as a makeshift sealer, thus creating greater consistency in the appearance of the floor.

Following this, I made a strong dilution of Tile Doctor Pro-Clean, which is a high alkaline cleaner which is safe to use on stone, in order to tackle the bad staining on the tiles and grout lines. Once applied to the floor, the solution was left to dwell for a short period of time. By allowing the solution to sit like this, the cleaner is able to seep into the stone, get underneath the dirt and stains, and lift them to the surface. Pro-Clean is highly effective at treating stained tiles, while common acid-based, household cleaning products can cause further damage over time.

To remove the resulting muck from the surface I used a set of Tile Doctor Burnishing pads applying them individually to each tile in sequence from Coarse to Fine, rinsing the floor in-between each pad and removing the resulting residue using a wet-vac machine. The pads are encrusted with diamonds and are ideal for bringing back the finish of Travertine and did a great job of making the filled holes look part of the original floor.

Stained Travertine Hallway Oundle After Cleaning

Sealing a Travertine tiled floor

After leaving the floor to dry overnight, I returned to the house to seal the newly cleaned tiles. I did this using Tile Doctor Colour Grow, a colour intensifying sealer that also provides a durable surface seal and pleasing finish (as you can see from the photographs).

Overall the job took roughly two days of work to complete and my client was extremely pleased with the results and even left the following comment on the Tile Doctor feedback system:

“Phil was reliable and very professional. Written quote provided detailing in exact detail the work to be done and the products to be used. It was a large area that needed to be treated. Arrived on time and got the job done in good time. Certainly recommend Phil”.

Source: Travertine Tile and Grout cleaning and polishing service in Northamptonshire

Putting the Shine back on Travertine

Posted on November 17, 2015 by AbzDominise

Polished stone floors will lose their shine over time depending on the amount of wear and cleaning products used and this Travertine Tiled Floor in Lower Woodrow had basically experienced this problem. The solution is to burnish the floor with diamond encrusted pads, a process that will remove any dirt and bring back the polish.

Travertine Floor Before Polishing in Lower Woodrow

Cleaning and Polishing Travertine Floor Tiles

We started by smothering the floor is a mild dilution of Tile Doctor Pro-Clean and left it to dwell for ten minutes. We then scrubbed the grout lines using a stiff grout brush to get the grout clean. Next we fitted a course diamond burnishing pad to a rotary machine and slowly burnished each and every tile. We then extracted the slurry using a wet vacuum and rinsed. We continued this procedure with the medium, fine and very fine pads rinsing in-between until the shine had been restored. We then left the floor overnight to dry.

Sealing Travertine Floor Tiles

Upon our return we sealed the floor using Tile Doctor Colour Grow which is an impregnating sealer that soaks into he pores of the stone protecting it from within and enhancing the natural colours in the stone. Once the seal had dried I used a white buffing pad attached to the rotary machine and buffed the travertine to a nice shine.

Travertine Floor After Polishing in Lower Woodrow

Source: Travertine Tile and Grout cleaning and polishing service in Wiltshire

Maintaining a Travertine Floor

Posted on November 10, 2015 by AbzDominise

Travertine is a beautiful natural material which due to its hardness makes a fantastic flooring material. To get the best out of it though it does need to be polished as it does dull over time depending of the amount of wear it receives. I also recommend sealing it as well as this will protect the stone from staining and if you have the right sealer it can enhance the look of the stone even further.

Travetine Tiles in Fareham Before Cleaning

Cleaning Travertine Kitchen Tiles

This Travertine tiled floor in Fareham was due a polish so I gave the floor a quick clean using Tile Doctor Pro-Clean paying particular attention to the grout with a stiff grout brush. The dirty solution was then removed using a wet vacuum and I moved onto burnishing the Travertine to bring up the polish.

Burnishing requires a set of four diamond encrusted pads with different grits from coarse to extra fine and are applied to the floor using a little water to help lubricate the process. It’s also necessary to rinse the floor between each pad to remove the slurry that is generated in the process. Burnishing took most of the day so once finished I give the floor a final rinse and left it to dry off overnight.

Sealing Travertine Tiled Floor

I came back to seal the floor the next day using two coats of Tile Doctor Colour Grow which is an impregnating sealer that soaks into the pores of the stone providing protection from within the stone and also enhancing the natural colours of the stone.

Travetine Tiles in Fareham After Cleaning

On reflection I can see I probably should of taken more photographs of this floor, hopefully you can appreciate the difference which was quite remarkable.

Source: Professional Tile, Stone and Grout cleaning and maintenance services in Hampshire

Refinishing Travertine Tiles Post Installation

Posted on October 13, 2015 by AbzDominise

For this job, I was asked to work on my client’s newly installed bathroom in their house in Hull, the largest city in East Yorkshire. The new bathroom consisted of natural Travertine stone, and my task was to give the tiles a thorough clean, polish and seal. Travertine is a form of limestone with a distinct appearance consisting mainly of tan, white and cream-coloured shades. It’s commonly used for both residential and commercial use; although recently installed the tiles were dull and lifeless and not looking anywhere near their best.

Travertine Wall tiles Before Cleaning Polishing and sealing Hull

Polishing and cleaning Travertine bathroom tiles

My first task was to polish the wall tiles using the Tile Doctor burnishing system, this consists of four six-inch buffing pads with different grits. Starting with a coarse pad you grind off any dirt off the tile before moving onto the medium, fine and very fine pads which build up the polish. The result was a superior polished finish, as you can see from the below photo

Travertine Wall tiles Before Cleaning and Polishing Hull

Travertine Wall tiles After Cleaning and Polishing Hull

After achieving the desired polished finish, I set about cleaning the tiles using a solution of Tile Doctor Pro-Clean, a high alkaline cleaner safe to use on stone and grout, diluted with water. Once mixed, the solution was applied using spray bottles as the air makes the solution lighter and enables it to stick to the vertical surface. The solution was then scrubbed into the tile and grout to lift out any ingrained dirt and muck left over from the initial installation of the bathroom.

Following the clean I gave the bathroom tiles a good rinse with water to remove any trace of product; I used a wet-vacuum machine to remove any excess residue and left the tiles to dry.

Sealing Travertine bathroom tiles

The last step was to seal the bathroom Travertine tiles. After checking to make sure the whole area was completely dry, I applied five coats of Tile Doctor Colour Grow. Colour Grow is a colour intensifying, impregnating sealer which accentuated the natural shades in the Travertine, while at the same time providing a durable surface seal. The product is suitable for use on both internal and external Travertine tiled floors and walls, along with a range of other natural stone surfaces.

The sealer was applied using cloths, and the Tile Doctor three cloth system. The surface was also buffed after the application of each coat of sealer.

Travertine Wall tiles Cleaned Polished and sealed Hull

My client was very pleased with the end results; the Travertine surface finish is now looks exactly the way she had expected it to look.

Source: Professional Tile, Stone and Grout cleaning services in East-Yorkshire

Changing the Sealer on Limestone Patio Tiles

Posted on September 21, 2015 by AbzDominise

Another quick job here in Cheshire, this time in the town of Wilmslow. Much like Alderly Edge, where I recently completed another job, Wilmslow is an affluent area known for its upmarket lifestyle and as a popular option for residence amongst celebrities and famous figures. In fact it is currently, and has previously been, home to several Premier League footballers from the nearby clubs Manchester United and Manchester City.

This job was another case of where a tiled floor had lost its shine due to the sealer wearing away over time. In this instance, my client had a Travertine tiled floor in her kitchen that she wanted to me to restore back to looking at its best.

Travertine Tiled Floor Before Refurbish Wilslow

Travertine is a fantastic natural stone which possesses unique features that no other stone can offer. It offers a particularly distinctive design style, making it a popular choice both for commercial and residential use. Many homeowners use Travertine tiles for kitchen flooring, bathroom walls and floors and for external floors, such as patios.

Removing the old sealer

The process of stripping off old sealer can be done effectively and relatively quickly without using a liquid stripper. The best method is to use a series of fine diamond encrusted burnishing pads, which is exactly what I did in this case. The burnishing pads are applied in sequence from coarse, medium, fine and superfine to remove the old sealer without damaging the Travertine and then re-polish to a lovely polished shine.

Applying a new sealer for protection and colour enhancement

One the floor had been burnished, rinsed and dried; I proceeded to re-seal the floor with Tile Doctor Colour Grow. Colour Grow is particularly effective when to seal porous natural stone surfaces such as Travertine and Limestone, whether internal or external. This is because the product is specially formulated to penetrate deep into the pores of the stone, providing durable surface protection from within.

The other key benefit of Colour Grow is that it intensifies the colours within the stone, as you can from the photos. This adds additional character and flair to already impressive household features like this Travertine floor.

Travertine Tiled Floor After Refurbish Wilslow

The finished results were exactly what my client had hoped for. It goes to show that with the right methods and know-how such a big difference can be made to the appearance of tiled floors. I was very happy to help.

Source: Professional Tile, Stone and Grout cleaning services in North-Cheshire

Repairing Cracked Travertine Tiles with Stone Filler

Posted on August 22, 2015 by AbzDominise

Every now and again, I get a call from a client located on the small peninsula of Sandbanks, Poole. Sandbanks, sometimes referred to as ‘Britain’s Palm Beach’, is known for its fantastic beach and high value property. My client asked me to take a look at a Travertine floor in his kitchen which was, in fact, more highly polished than he had wanted. The polished finish had worn off the travertine tiles where they had been walked on, leaving a dull trackway running down the centre of the kitchen. With its distinct characteristics, travertine is a popular choice for kitchen flooring, although it is also quite often used in bathrooms. In any case Travertine tiles will need regular maintenance to keep them looking their best.

Travertine tiled floor before cleaning in Sandbanks

Unfortunately, the kitchen floor must have experienced some sort of settlement or shrinkage as a long crack has appeared, which ran along the same line as the dull trackway. It is not uncommon for Travertine tiles to crack due to wear over time, or even bad fitting in some cases. While the exact cause of the crack was unclear, the homeowner concluded that the floor was certainly in need of restoration.

Repairing a crack in a Travertine tiled floor

Replacing the Travertine tiles was not an option due to a lack of spare tiles, so I opted instead to fill the crack in the floor using Harbro Stone Filler, an epoxy stone filler, matching the colour of the tile as closely as possible. I left this to set, before sanding down the excess filler.

My next action was to use a set of Tile Doctor Diamond burnishing pads to sand out any scratches and restore a more even shine to the floor, as per the client’s request. For polished stone, I recommend using a set of four burnishing pads applied in order: Coarse, Medium, Fine, and Very Fine. I used these one after the other with a little water to lubricate and restore the surface polish to the desired level.

Sealing a Travertine tiled floor

The next day, I returned to seal the floor with a couple of coats of Tile Doctor Colour Grow sealer. Colour Grow is a colour enhancing, impregnating sealer which penetrates deeply into the pores of the stone, thereby preventing dirt from becoming ingrained within. This particular sealer also enhances the natural colours within the Travertine tile, whilst also providing long term durable protection.

Travertine tiled floor after cleaning in Sandbanks

Although the crack could not be made to disappear completely, its appearance was much improved. The customer was also very pleased with the long-lasting lower sheen provided, describing it as “the finish I had wanted in the first place when the tiles were fitted”.

Source: Professional Tile, Stone and Grout Cleaning service in Dorset

Maintaining Travertine Floor Tiles

Posted on January 28, 2014 by AbzDominise

This Travertine tiled floor had been laid in a house in the picturesque village of Brightwell-Cum-Sotwell in south Oxfordshire and the owner had decided it was time to have it properly cleaned and re-sealed.

Cleaning Travertine Floor Tiles

The floor was given a wash with Tile Doctor Neutral Cleaner to remove any surface grit and we then filled the small holes, which are quite a common feature of natural travertine, with a matching coloured grout.

This was then followed by the use of the Tile Doctor burnishing system which involves the use of a set of four Burnishing pads fitted to a rotary machine. There are four pads and you start off with a course stripper pad with a little just water and then carry on with the white pad and then the yellow pad until the floor is thoroughly cleaned and any previous sealer removed. Next step was to use Tile Doctor Pro-Clean along the grout lines with a stiff brush to get the grout cleaner.

To bring up the polish on the Travertine tile you then apply the last of the four burnishing pads with gives a final polish.

Sealing Limestone Floor Tiles

To seal the floor and protect it from staining two coats of Tile Doctor Colour Grow as applied; Colour Grow is a colour enhancing sealer which enhanced the natural colours in the stone. Once dry the last step was to buff the floor to a nice shine with a rotary machine fitted with a white pad..

Source: Travertine Maintenance Specialist in Oxfordshire