These travertine wall tiles were laid in a brick pattern in a large shower cubicle in a house in Wandsworth, South London. As you can see the tiles hadn’t been cleaned for a couple of years and had become discoloured from the shampoo dyes etc, there was also some mould which is a common problem in wet areas and usually down to insufficient ventilation. The owner wanted to sell her house and was keen to get the shower looking like new again.
Cleaning Travertine Wall Tiles
We cleaned the Travertine wall tiles using a dilution of Tile Doctor Pro-Clean. It’s always best to leave Pro-Clean to dwell for a few minutes before cleaning so it can get to work on the dirt, as you would expect however liquids will simply run down a wall tile so the trick here is to apply the solution using a spray attachment; the idea behind this is to combine the product with air so it becomes lighter and sticks to the tile. Then next step is to get in with a small stiff scrubbing brush and really work the solution into the tile and grout and loosening the dirt along the way and the wash the wall down with water to remove any cleaning products.
 |
 |
Sealing the Travertine Wall Tiles
The wall was wiped down and allowed to dry for before applying the sealer. There are a number of products you can use for sealing Travertine and in this case I used Tile Doctor Ultra Seal which provides stain protection without changing the appearance of the tile. The last step was to remove and replace the silicone seal between the Travertine tile and the shower tray, there was some mould build up on the original silicone which wants it gets a hold into the silicone it cannot be removed and so it’s always best to replace. At the end I had one happy customer and I think you will agree I achieved the aim of making it look like new again.
 |
 |
 |
|