Mouldy Travertine Tiled Shower Renovated in Sheffield

I was asked to call into a property in the Sheffield suburb of Totley to renovate a troublesome Travertine tiled shower enclosure. The customer simply couldn’t keep the shower clean and the travertine was just getting dirtier and dirtier. I could see from the pictures that the stone tiles were becoming stained with the use of shampoo and soaps, also there was evidence of mould build-up which had led to some of the grout turning black.

Once I was on site, I could see that any sealant that may have been present on the Travertine had broken down and worn off leaving the pores in the stone vulnerable to dirt etc. Once dirt has become ingrained you will find it very difficult to get rid of it using normal household cleaners. I discussed with the client the best course of action, we chatted about the cost and they were happy to go ahead with the work. The work would take less than a day to complete.

Travertine Tiled Shower Enclosure Before Cleaning Totley

Cleaning a Travertine Tiled Shower Enclosure

I started by applying Tile Doctors Oxy-Gel which is a Tile and Grout cleaning product in a Gel form that allows it to cling to walls without running off. This means you can leave it working on the Tile and Grout for as long as you want. Thirty minutes is normally enough to clean most stone and lift the underlying dirt. The Oxy-Gel was then scrubbed in by hand and rinsed off with water. The first clean, removed most of the dirt and grime, however the really stained areas were treated twice.

Once the stone was clean, I turned my attention to the mould stained silicone seal between the tile and shower tray. I worked carefully to remove the existing silicone with a sharp knife to ensure neither the tile or shower tray was damaged. After cleaning up the area and making sure it was dry new Limestone coloured silicone was inserted to match the grout. It’s important to use good quality silicone as the cheaper ones tend to discolour fast.

Sealing a Travertine Tiled Shower

Once the tiles were fully dry, I set about sealing the Travertine and Grout using two coats of Tile Doctor Ultra Seal. This is a premium, no-sheen, natural-look, sealer which is formulated to provide maximum stain protection, it is also an excellent grout sealer. The natural colours of the now clean Travertine tiles were able to shine through and any water now runs off the wall instead of collecting in the pores of the stone.

Travertine Tiled Shower Enclosure After Cleaning Totley

As you can imagine my client was delighted with the result. To ensure they stopped using the household cleaners applied previously we left them with some free Tile Doctor Aqua-Pro shower cleaner and instruction on how to keep the shower area looking great. This product is pH neutral so will not prematurely erode the sealer which happens with stronger supermarket products.

 

Source: Travertine Tile Cleaning, Restoration and Sealing Service in Sheffield, South Yorkshire

Travertine Wall Tile Shower Restored

These travertine wall tiles were laid in a brick pattern in a large shower cubicle in a house in Wandsworth, South London. As you can see the tiles hadn’t been cleaned for a couple of years and had become discoloured from the shampoo dyes etc, there was also some mould which is a common problem in wet areas and usually down to insufficient ventilation. The owner wanted to sell her house and was keen to get the shower looking like new again.

Cleaning Travertine Wall Tiles

We cleaned the Travertine wall tiles using a dilution of Tile Doctor Pro-Clean. It’s always best to leave Pro-Clean to dwell for a few minutes before cleaning so it can get to work on the dirt, as you would expect however liquids will simply run down a wall tile so the trick here is to apply the solution using a spray attachment; the idea behind this is to combine the product with air so it becomes lighter and sticks to the tile. Then next step is to get in with a small stiff scrubbing brush and really work the solution into the tile and grout and loosening the dirt along the way and the wash the wall down with water to remove any cleaning products.

Travertine Wall Tiles Before Cleaning Travertine Wall Tiles Before Cleaning

Sealing the Travertine Wall Tiles

The wall was wiped down and allowed to dry for before applying the sealer. There are a number of products you can use for sealing Travertine and in this case I used Tile Doctor Ultra Seal which provides stain protection without changing the appearance of the tile. The last step was to remove and replace the silicone seal between the Travertine tile and the shower tray, there was some mould build up on the original silicone which wants it gets a hold into the silicone it cannot be removed and so it’s always best to replace. At the end I had one happy customer and I think you will agree I achieved the aim of making it look like new again.

Travertine Wall Tiles After Cleaning Travertine Wall Tiles After Cleaning
Travertine Wall Tiles Finished

 
 
Source: Wandsworth Travertine Shower Refresh