Photographs below of a Travertine tiled floor we were asked to re-polish in the kitchen of a house in the village of Hook in Hampshire. The main problem was the floor had been sealed very badly and made worse when the tiler tried to rectify the problem leaving a dull and stained floor.

Travertine Floor Before Repolishing

Stripping and Re-Polishing Travertine

To strip the sealer from the floor and get it back to the original condition we used a set of diamond encrusted Burnishing Pads fitted to a rotary machine. You start with a Red stripper pad with water to remove the sealer, moving onto the White, Yellow and Green pads which polish the floor. Once the surface was restored we applied two coats of Tile Doctor Pro-Seal which is a premium, no-sheen, natural look, water based, penetrating sealer formulated to provide maximum stain protection to the Travertine and the Grout.

The customer was over the moon at the finish and I’m sure the tiler breathed a big sigh of relief as well.

Travertine Floor After Repolishing

 
 
Source: Re-Polishing a Travertine tiled kitchen floor in Hook, Hampshire