Resolving travertine tile problems

I was recently asked to visit a customer with a Travertine Tiled Kitchen floor in Mitcham South London who had spilt a strong cleaning product on the Travertine Tiles. Due to the litigious nature of the wold in which we live I can’t name the product in this post but I can tell you it’s advertised on the TV as a wonder cleaner, unfortunately acidic products like this one will eat into the sealer and with frequent use cause holes to appear in natural stone. Fearing that he had ruined them I checked the floor over and assured him I could make his tiles look as good as new.

Travertine Mitcham Before Travertine Mitcham Before

Cleaning Travertine Tile

I used the diamond encrusted burnishing pad system starting with the red pad and water to clean the tiles and remove any topical sealers that may have been present. This was continued with the white and yellow pads using nothing but water and then with a stiff grout cleaning brush and a weak solution of Tile Doctor Pro-Clean along the grout lines to make sure all the grout was thoroughly cleaned. Last step of the cleaning process was to rinse the floor of any dirt picked up by the pads and then when the floor was dry I used a green polishing pad to add a shine to the floor.

Sealing Travertine Tile

To protect the travertine it was sealed using a single coats of Tile Doctor Colour Grow which is an impregnating sealer which brings out the natural colour in stone. Once it was all dry again I buffed it up again but used a soft white buffing pad. As you can see by the photos the tiles look great and I have one very grateful customer who said they look better than when they were first laid.

Travertine Mitcham After Travertine Mitcham After

 
 
Source: Travertine Tiled Kitchen floor Restoration

One thought on “Resolving travertine tile problems

Comments are closed.