Filling holes in Travertine Tiles

Details below of another Travertine tiled floor that we re-furbished recently in the kitchen of a house in Lutterworth which is a market town located in southern Leicestershire. The floor was looking dull and flat and the colours had become washed out, it now needed burnishing to strip off the dirt and bring back the polish; another problem were the natural holes which you find in Travertine had not been filled and were now trapping dirt and proving difficult to clean.

Travertine Kitchen Floor Tiles Lutterworth Before Polishing

Filling Holes in Travertine

To deal with the ingrained dirt and to remove any surface coatings the floor was cleaned with a dilution of Tile Doctor Remove and Go, this is quite a strong product normally reserved from stripping sealers and other coatings but it’s also an effective cleaning product so to save time I decided to use this first giving the floor a thorough wash down and rinse afterwards. The grout was also given a thorough scrub during this activity and once that was done the soiled waster extracted the floor was inspected and the holes in the travertine filled using a special Travertine filler product.

Burnishing Travertine Tiles

The next step was to burnishing the entire floor using a set of burnishing pads which strip back any surface dirt from the stone using a coarse diamond encrusted burnishing pad and then building up the finish with a medium, fine and super fine pad until you have restored the polish and appearance. This process blends the Travertine filler added earlier into the stone so it’s impossible to tell the holes had been filled; I should mention you need to use little water which is used to lubricate the process and in-between each pad the resultant slurry is rinsed away. Once this is done the floor is given a thorough rinse which is then extracted and then left to dry overnight.

Sealing Travertine Floor Tiles

On our return the floor was checked to ensure it had dried out using a damp meter in a few different spots. The floor was dry so it was sealed using a tow coats to Tile Doctor Colour Grow which is an impregnating sealer that gets into the pores of the stone to prevent dirt from becoming ingrained there; Colour Grow also enhances the colours in the stone and this works well on Travertine as it brings out the brown colours.

Travertine Kitchen Floor Tiles Lutterworth After Polishing

 
 
Source: Travertine Tile, Grout and Stone cleaning in Leicestershire

Resolving Travertine Tile Installation Problems

Incredibly this Travertine tiled floor had been laid just two weeks prior and unfortunately the tiler had not cleaned the floor prior to sealing thus trapping in dirt and dust that were present on the floor and now the tiles looked dull and dirty. Sealing floors can be a minefield and it’s possible the dirt was not that obvious and by sealing the floor it magnified the issue literally; whatever the reason the only solution would be to strip the floor of its sealer, clean the floor and then reseal.

New Travertine Floor Before Cleaning in Disbury

Maintaining Travertine Tiles

To strip the floor of the sealer and clean it requires the application of a set of diamond encrusted burnishing pads which are fitted to a rotary machine in a set sequence and run over the floor lubricated with a little water. There are four pads in the set, you start with a coarse pad which will remove ingrained dirt and sealers before moving on to the medium, fine and very fine polishing pads which are a much finer grit and restore the polished finish of the stone. The floor needs to be rinsed down between each pad application to remove the soil that is produced and then given a final wash at the end to make sure the floor is clean before sealing.

Polishing and Sealing Travertine Tile

The floor must be dry before sealing so it was left to dry overnight and I came back the next day to seal it using two coats of Tile Doctor Colour Grow which is an impregnating sealer that occupies the pores in the stone so dirt cannot become ingrained there and in the process it also enhances the natural colours in the stone. Once the sealer was dry it was buffed using a white buffing pad to make sure that I hadn’t left any residues from the seal.

New Travertine Floor After Cleaning in Disbury

The customer was very happy with work and they now have the floor that they wanted.
 
 
Source: Tile, Stone and Grout Cleaning in Greater Manchester

Filling Cracks in Travertine Floor Tiles

This job was a Travertine tiled Kitchen floor in West Disbury, the customer ask me to have a look at the tiles which had been down for three years and had quite a lot of cracks in, on top of that it had not been sealed very well when it had been laid which had allowed dirt to become ingrained into the tile leaving it looking dull.

Travertine Floor West Disbury Before Travertine Floor West Disbury Before

Maintaining Travertine Tiles

The first job was to wash the floor down to remove any grit from the floor and then remove what remained of the old sealer, now with Travertine being a very hard stone it has to be removed using of a set of diamond encrusted burnishing pads fitted to a rotary machine. Once this was done all the cracks in the Travertine were filled in using a flexible grout which was a blend of three different grout colours in order to get a shade that matched the colour of the travertine. The tiled area was quite confined and tricky to work in so this process including the sealer removal took two days in all.

Polishing and Sealing Travertine Tile

On the third day I used the fine burnishing pad to give the final polish and then to protect the floor from stains it was sealed with two coats of Tile Doctor Colour Grow which is a colour enhancing sealer that brings out the colours in natural stone. Once the sealer was dry it was buffed using a white buffing pad to make sure that I hadn’t left any residues from the seal.

Travertine Floor West Disbury After Travertine Floor West Disbury After

The customer was very pleased with the finish and found it very hard to spot the cracks I had filled.
 
 
Source: Travertine Tile Repairs in Manchester

Maintaining the Polish on Travertine tiles

I had a phone call a few weeks ago from a lady in Gerrards Cross to come and clean her large Travertine tiled floors prior to her renting out a property. I had actually carried out this job for her four years ago and she was really pleased with the service we provided and had therefore asked me come back. Thinking back four years is a long time between floor polishes so we certainly did a good job on the floor the first time.

Maintaining Travertine Tiles

Travertine is a very hard stone which required the surface to be cut back before polishing, to do this we make use of a diamond encrusted burnishing pad system which is supplied in a set of four pads each one having a different purpose. We started with a Red pad first together with a little water and this strips dirt and old sealers from the floor, this is followed with the White, Yellow and finally Green pad which doesn’t required the use of any water. As you progress through the pads you find the polish is restored and you get a deep shine in the surface of the tile.

Sealing Travertine Tile

To protect the floor from stains it was sealed with a single coat of Tile Doctor Colour Grow which is a colour enhancing sealer that brings out the colours in natural stone. Once the sealer was dry it was buffed using a white buffing pad to make sure that I hadn’t left any residues from the seal.

Once again the lady was really pleased with our work and promised to call the next time the property was to be let out again, but next time she wants me to do the carpets and the patio areas as well.
 
 
Source: Cleaning and sealing Travertine floor tiles in East Surrey