This homeowner from Bolton contacted us due to problems they were having with their Travertine tiled floor which ran through most of the ground floor. They had previously had some work done by a ‘cleaner’, but the results were not great. Hoping to do better they also had a go themselves without much improvement.
They were ready to give up on the floor but due to the huge cost of replacement decided to look at alternatives. Researching the subject on-line they came across the reviews and transformative pictures on our website and decided to get in touch.
I paid a visit to the property to survey the floor and could see the Travertine had clearly had a lot of unknown treatments in the past. Having assessed the floor I came up with a comprehensive plan that would restore the appearance of the travertine and grout. Happy with my quote we agreed a date for the work to start.
Deep Cleaning Travertine Tiles
The first step was to apply a strong dilution of Tile Doctor Remove and Go and left it to soak for ten minutes before working it in to the stone using a 240-grit carbide brush. Once done the floor was rinsed with water and the soiling extracted using a wet vacuum. I had to repeat this process on stubborn areas but gradually the floor was stripped of old sealers and marks leaving it clean.
To deal with the grout I applied Tile Doctor Pro-Clean and left it to dwell for fifteen minutes to give it time to breakdown the soils. It was then scrubbed into the grout lines by hand using a stiff brush. The floor was then rinsed again, and the waste removed.
With the floor clean of dirt, it became apparent some of the dirt had masked cracks and holes in the stone. So, although this was not listed on the quote, I spent time filling them in to enhance the overall finish.
Work then moved onto burnishing the Travertine to restore its polished appearance. This starts with the application of a coarse 400-grit pad. Using water to lubricate the pad as its run over each tile several times to give the stone a very deep clean. The floor was then rinsed and extracted, before moving onto the finer 800-grit and 1500-grit pads which start building the polish on the stone.
The floor was left to dry off overnight and the next the burnishing process continued using a very fine 3000-grit pad which is applied dry to the floor using only a little water sprayed onto the tile. This leaves a lovely, honed finish on the stone.
 |
 |
Sealing a Travertine Tiled Kitchen, Utility, WC and Hallway
To seal the stone a coat of Tile Doctor Ultra Seal was applied to retain the light colour the client liked and cloth off before applying a White Pad to remove any excess sealer and further bring up the polished appearance of the Travertine. Ultra-Seal is an impregnator that soaks into the pores of the stone adding protection from within, it’s also a natural look sealer that is almost invisible and doesn’t darken the colour of the stone.
The process transformed the appearance of the floor and my client was delighted. So much so they left the following glowing review:
For the aftercare cleaning of their polished stone floor, I recommended the use of Tile Doctor Stone Soap. It’s a gentle yet effective floor cleaning product with a formula that enhances the patina on the stone.
Source: Travertine Floor Tile Cleaning, Polishing and Sealing in Bolton Lancashire
Serving South Lancashire, Kevin Parry is your local Tile, Stone and Grout maintenance expert. Additionally he is an agent of Tile Doctor, the largest professional Tile, Stone and grout restorative cleaning network in the UK. Tile Doctor has developed products and techniques to handle a multitude of issues surrounding tile, stone and Travertine Tiled Tile, interior, exterior, domestic or commercial.