Achieving a Deep Polish on Large Travertine Tiled Floor in Cambridge

Travertine is a type of Limestone which exists in several variations, including white, tan, and cream-colored. It has distinct colourings and patterns that no other stone can offer and as such it is a very popular choice for tiled floors amongst home owners.

However, Travertine tiles are not the easiest to keep looking at their best. A high-quality polished finish can be difficult to maintain, especially as sealers wear away and all manner of dirt becomes ingrained in the pores of the stone.

The pictures below were taken at a house in Cambridge where the owner had this exact same problem and requested my help to get them looking their best again. The Travertine tiles had been installed across most of the entire ground floor of the house, including the kitchen, dining room, living room, office and utility room.

The owner was not happy with the current appearance of the floor because the shine and reflectivity that had once existed had gradually worn away. The floor was also littered with many pitted holes (caused by natural erosion) and a few cracks which would need to be filled.

Travertine Floor Before Cleaning Cambridge Travertine Kitchen Floor Before Cleaning Cambridge

Cleaning and Burnishing Travertine Tiles

My first step in restoring the tiles was to remove the kick boards from around the kitchen and utility room, before masking up all walls and wooden units with protective décor film. This was done to prevent these areas from encountering any cleaning product.

Travertine Kitchen Floor Before Cleaning Cambridge

Next, I began the cleaning process by applying Tile Doctor Pro Clean across the entire area and worked it into the stone using a scrubbing brush fitted to my rotary machine. This high alkaline cleaner broke down any old sealer while also relieving the stone and grout lines of any ingrained dirt.

After the initial clean, I used the Tile Doctor system of four diamond encrusted burnishing pads on the tiles. Burnishing is a form of polishing that involves gradually honing the surface of the stone, first by applying a Coarse grit pad, followed by a Medium, Fine, and finally a Very Fine grit pad to achieve a high quality polished finish. The system uses a little water for lubrication and the floor is rinsed between each pad to remove the soil so it can take some time to complete especially on a floor this size.

Once I was done I filled in the pitted holes and cracks with an appropriate resin filler before applying the Very Fine pad.

Travertine Floor Tile After Crack Repair Cambridge

Sealing Travertine Tiles

To finish the restoration, the tiles needed to be sealed. I did this firstly by applying Tile Doctor Shine Powder, which is natural sealer in a crystallising powder form. I applied it using a white pad and polished the tiles to provide the very high shine and tough durable finish the client had requested.

Following this I applied one coat of Tile Doctor Ultra Seal, which is an impregnating sealer, to add further protection. To add the finishing touches, I quick buffed the floor with Tile Doctor Stone Patina Spray, a cleaner that is designed to enhance the natural beauty and lustre of polished stone as it cleans. Regular use of this product helps to maintain the polished effect.

Travertine Floor After Cleaning Cambridge Travertine Kitchen Floor After Cleaning Cambridge

The customer absolutely loved her new floor. She even remarked that it looked as good as new and better than ever before.
 
 
Source: Travertine Tile Cleaning and Polishing in Cambridgeshire

Pitted Travertine Kitchen Floor Restored and Filled in Devon

This Travertine kitchen floor in Exeter was mistakenly bought unfilled so there were deep holes on the surface of the stone that attracted grime and dirt in addition the floor had not been sealed to protect the stone and the whole floor was now in need of a deep clean and seal. The owners had installed the floor about five years before and were disappointed by the appearance from the onset. In fact, the floor had never lived up to their expectations and were close to ripping it up and starting again.

Unfilled Travertine Floor Exeter Before Burnishing

Travertine is a lovely stone and really adds to the appearance of any room however being a form of Limestone and acid sensitive it naturally suffers from pitting corrosion which leads to the creation of small holes in the stone. These small holes rapidly become ingrained with dirt and this ruins the appearance of the floor. Typically, Travertine tiles will be bought with the pitted holes pre-filled with a resin to avoid this problem.

After an initial visit to test the floor to identify the best products to use and a chat with the owners to talk through options, duration and processes involved a quote was produced along with standard T&Cs and the work was booked in to be completed shortly after.

Unfilled Travertine Floor Exeter Before Burnishing

Burnishing a Dirty Travertine Tiled Kitchen Floor

Burnishing is our tried and tested process for restoring polished stone such as Travertine, Limestone and Marble which has become stained and dirty. It involves the application of four diamond encrusted burnishing pads of varying grit levels from 100 to 1500.

The first pad, which is Coarse, was applied to the stone together with a dilution of Tile Doctor Remove and Go, a strong stripper/degreaser to get into the pitting and lift the grime and completely strip away the top layer of dirt, exposing the clean layer underneath.

The floor is rinsed with water and the soil extracted before the application of the Medium, Fine, and eventually the Very Fine pad to build up the polished appearance of the stone.

As well as using the burnishing pad system, I also applied to the floor Tile Doctor Remove and Go, which removes any old sealer and penetrates the pitted holes to lift out and dissolve the ingrained dirt.

At the end of the first day the floor was thoroughly rinsed to remove the dirt and chemicals from the now clean floor and the majority of the pitting was filled with a suitable filler.

Sealing a Travertine Tiled Floor

The floor was left to dry off overnight with the assistance of underfloor heating and then the following day a 3,000 grit extra fine diamond pad was used to clear off any remaining residue and give the tiles a slight shine before moving onto the next step of sealing the tiles.

I sealed the floor using Tile Doctor Ultra-Seal, which is a natural look penetrating sealer that leaves a matt finish. The sealer will ensure the tiles are more resistant to staining and allow the floor to look as the customer originally wanted it to look for a lot longer.

Unfilled Travertine Floor Exeter After Burnishing

For after care I left the customer with a bottle of Tile Doctor Stone Soap which is a very easy to use, neutral pH cleaner for natural, sealed stone which not only cleans the tiles but continues to add to the natural patina so the more you use it the better the floor continues to look.

Unfilled Travertine Floor Exeter After Burnishing

 
 
Source: Travertine Tile Cleaning and Restoration in Devon

Filling and Cleaning a Pitted Travertine Kitchen Floor

This Travertine Tiled kitchen floor was in a farmhouse close to the village of Newnham near Daventry. The client had called us in because she was concerned that her floor was becoming increasingly difficult to keep clean which was due to the small holes and pits becoming ingrained with soil and it was becoming difficult to remove as the original sealant had worn off.

Hopefully you can see from the pictures the results that can be achieved on a badly stained and pitted Travertine floor. The first photo below shows the extent of the problem due to many holes in the floor, this is a characteristic of Travertine and normally these holes are filled in the factory but the filler does come out over time leaving holes.

Travertine Tiled Kitchen Floor Before Cleaning Daventry Northants

Cleaning a Pitted Travertine Tiled Floor

The floor was cleaned using a combination of Tile Doctor Burnishing Pads to re-surface the tile and the application of Tile Doctor Grout Pro-Clean agitated with a stiff brush to clean out embedded soil in the pits and grout lines. The Burnishing pads fit a rotary floor polishing machine and come in a series of different grits which are applied from Coarse through Medium and then Fine and lubricated with a little water.

I also carried out some repairs to the larger holes with a travertine filler that was mixed to match the existing colours. The second picture shows the repairs in progress, the filler is mixed and applied before leaving an hour and then polishing off any excess filler with dry cloth, the floor was then vacuumed and allowed to fully dry overnight allowing the product to harden.

Travertine Tiled Kitchen Floor After Cleaning Daventry Northants

Sealing a Travertine Tiled Floor

The floor was polished and sealed the following day using 2 coats of Tile Doctor Ultra Seal sealant to protect the grout lines and stone from any staining in future, it leaves a no-sheen natural look which worked very well in the kitchen area.

I waited a for the sealant to dry and then carried out a water repellency test to check it was fully sealed before giving the floor a final polish using a Tile Doctor Polishing Pad.

Travertine Tiled Kitchen Floor After Polishing Daventry Northants

 
 
Source: Travertine Tile and Grout Cleaning and Restoration in Northamtonshire

Deep Cleaning a Travertine Kitchen Floor in the Cotswolds

Details below of an unusual Travertine tiled kitchen floor in Greet, Gloucestershire where we were asked to restore the appearance of the tiles and leave a natural as opposed to shiny finish. Greet is a lovely little village at the edge of the Cotsworlds and famous for being a short walk to Winchcombe station on the Gloucestershire Warwickshire Railway which is run by volunteers and often has steam trains running on its line.

Travertine Kitchen Floor in Greet Before Cleaning Travertine Kitchen Floor in Greet Before Cleaning

Burnishing a Travertine Tiled Floor

Travertine responds well to burnishing which is an abrasive cleaning method as opposed to chemical. Basically, it involves the application of several different grades of diamond encrusted pad to the stone lubricated with a small amount of water. You run the pad over each tile and then give the floor a quick rinse before moving on to the next pad, I started with the first of the four burnishing pads which is a coarse 400 grit pad that designed to grind away the dirt and old sealer on the surface of the floor.

After applying the first pad, I moved my way through the medium 800 and fine 1500 grit pads to gradually restore the appearance of the Travertine. Normally I would of also applied the fourth pad in the series but if you recall the customer did not wanted a polished appearance so I stopped after the 1500 grit pad.

Travertine Kitchen Floor in Greet During Cleaning

The pads work well on tile but struggle to reach recessed grout so to clean that I applied a medium dilution of Tile Doctor Pro-Clean and scrubbed it into the grout lines manually using a stiff grout brush. Once I was happy with the appearance of the grout the soiled cleaning solution was rinsed away with water and extracted using a wet vacuum leaving the floor to dry off overnight.

Sealing a Travertine Tiled Floor

The next day I returned to finish the floor and first task was to run a Tan buffing pad over the floor to ensure the floor was clean and any residue from the diamond pad burnishing had been removed.

Travertine Kitchen Floor in Greet After Cleaning Before Sealing

Once I was happy with the tiles I proceeded to apply two coats of Tile Doctor Colour Grow which is an impregnating sealer that protects from within by occupying the pores in the stone so dirt can penetrate and lifts the natural colours in the stone in the process.
I should mention that normally only one coat of Colour Grow is usually required to seal Travertine however on this occasion the stone was quite porous.

Travertine Kitchen Floor in Greet After Cleaning and Sealing Travertine Kitchen Floor in Greet After Cleaning and Sealing

The colours in the Travertine were so much more vibrant after the job was completed and the customer was happy with the result, although personally I would have preferred to have applied the fourth pad to build up the shine however I delivered what the customer had asked for so I was happy with that.
 
 
Source: Travertine Tile Cleaning and Restoration in Gloucestershire

Restoring the Polish on Travertine Kitchen Tiles in Buckinghamshire

Travertine is a type of Limestone which unique and distinctive features, making it a highly sought after and expensive type of natural stone tile. Not only is it a very attractive stone, it’s also a very useful building material. In fact, it’s been used since Ancient Roman times when it was the main component of temples, aqueducts, monuments, bath complexes, and amphitheatres.

In the modern era it remains popular, but to keep Travertine in fantastic condition it is necessary to ensure regular and professional maintenance. In this case seven years after this customer in Aylesbury had a Travertine tiled kitchen floor installed, the stone had significantly declined in appearance. Over time the sealant had worn away, allowing the dirt from everyday life to sink deep into the pores of the floor resulting in dirt becoming ingrained in the pores of the stone that the customer was unable to remove by themselves. Having tried hard to clean the floor to no avail – and keen to see the sheen restored to the tiles – the customer called me in for some expert assistance.

Travertine Tiled Floor Before Cleaning Aylesbury

Burnishing and Cleaning a Travertine Tiled Kitchen Floor

As with all of our customers, I conducted an initial free on-site survey and demonstration clean for the customer. During the survey, I determined that the sealer had completely broken down and that the best option was to use our Tile Doctor burnishing system to restore the tiles to a like-new appearance. We demonstrated this process, which involves the application of different diamond encrusted pads of varying grit to grind away dirt and refine the polish on the stone, on one of the most badly soiled tiles. The results were very impressive and the customer remarked on how much it transformed the tile.

After provision of a detailed written quote, the customer requested that I complete the service and two weeks later I was back to restore the whole floor.

The process took two days. On day one, I used the Coarse, Medium and Fine diamond burnishing pads to resurface the tile. This process uses water in conjunction with the burnishing pads to gently remove the top layer of the tile, along with any ingrained dirt, old sealer and scratches. Once I had completed the whole floor, I got to work cleaning the grout. For this, I used a strong solution of Tile Doctor Pro Clean, our reliable alkaline cleaner, in combination with a handheld scrubbing brush.

I then rinsed the floor, removed any excess water, and allowed it to dry overnight.

Sealing a Travertine Tiled Kitchen Floor

The following day, I returned to the property to seal the floor. Before I could seal it I needed to perform a dry buffing process using the fourth diamond encrusted pad with a Very fine grit. This process closes up the pores in the floor and provide a good quality sheen to the tiles.

Finally, I applied two coats of Tile Doctor Ultra Seal. This is an impregnating sealer that penetrates the tiles to provide maximum stain protection, especially in food preparation and serving areas. This sealer is completely transparent, so it does not affect the natural look of the stone.

Travertine Tiled Floor Before Cleaning Aylesbury

Once the second coat of sealer had dried, I buffed the floor one more time to remove any excess sealer. The customer was absolutely delighted with the result, leaving the following feedback:
“Andrew did an excellent job on our kitchen floor. The tiles are much cleaner than before and I’ve never seen them so shiny! Andrew was professional, knowledgeable, and very polite and friendly. Would not hesitate to recommend him!”
 
 
Source: Travertine Floor Cleaning and Polishing in Buckinghamshire

Removing Wax and Polishing Travertine Tiles

Travertine is a distinct and characterful stone that makes for some truly beautiful tiled floors. However, like any natural stone the main difficulty with Travertine tiles is keeping them looking fantastic and unfortunately without regular maintenance its appearance can decline over time.

This customer, who lives in Bury, contacted me for this exact reason. For the past decade, she had attempted to keep her Travertine floor clean by using some kind of wax polish, only to find that this actually made maintenance more difficult, the wax built up in layers and was difficult to remove.

Travertine Tiled Floor Before Cleaning Bury

I visited the property to conduct a test clean and determine the kind of results I could achieve through restoring the entire floor. The customer was very impressed with the small area I cleaned and booked me in on the same day to complete the full job.

Travertine Tiled Floor Before Cleaning Bury

Cleaning a Travertine Tiled Floor

As a result of my successful test clean, I already knew that the best process to restore the tiles was burnishing. This involves the application of different grades of diamond encrusted burnishing pads to strip away dirt and staining, and gradually polish the stone to achieve a quality shine.

Normally on Travertine tiles I would start by applying the Coarse 400 and Medium 800 grit pads, followed by moving up to Fine 1500 and Very Fine. In this particular case, I started by using a Very Coarse 200 grit burnishing pad to strip off the wax coating and old sealers from the tiles. The pad was fitted to a rotary machine and lubricated with a small amount of water.

After finishing with the 200-grit pad, I removed all soiled water with my wet vacuum. There were still few areas of wax left in the corners of the room, and on these areas, I used a 200 grit handheld burnishing block.

When I finished with first round of burnishing, I repeated the exact same process with the 400, 800, and 1500 grit pads, rinsing away the soil in between until I was left with a high quality polished finish right across the floor.

Travertine Tiled Floor During Polishing Bury

After completing the burnishing, I filled a number of small pitted holes in the stone using a beige flexible epoxy-based grout to match the rest of the floor. I then left the floor to dry until the next day.

Sealing a Travertine Tiled Floor

The next day I returned to the property and used a damp tester to make sure the floor was dry enough for sealing. Usually with polished tiles this isn’t a problem, but sometimes the grout can be an issue. Luckily, there weren’t any issues with dampness.

Before sealing I went over the floor again using the Very Fine grit pad with a tiny amount of water as lubricant. Finally, I sealed the floor with our impregnating sealer known as Tile Doctor Colour Grow. The sealer penetrates the stone and enhances the natural colours and patterns in the stone. I polished off any excess sealer with several cotton cloths.

Travertine Tiled Floor During Sealing Bury

To make sure the floor was in pristine condition I went over the floor for a final time with the Very Fine grit pad to smoothen the surface after sealing.

Travertine Tiled Floor After Cleaning Bury

The customer was extremely pleased with the result, and even promised to recommend me to her daughter to clean and seal her Marble tiled floor. I also left her a free bottle of Tile Doctor Neutral Tile Cleaner to help her ensure the floor stays beautiful, we recommend Neutral Clean for the regular cleaning of sealed floor as most supermarket cleaners are acidic and will reduce the life of your sealer over time.
 
 
Source: Travertine Tile and Grout Cleaning and Polishing Service in Greater Manchester

Dealing with a Pitted Travertine Tiled Floors

The following pictures show the amazing results that can be achieved with a badly stained and pitted Travertine floor. Covering an area of approximately 40m2 the tiles had been laid four years earlier in the Kitchen and Hallway of a house in Helmdon Village. The sealer had since worn off and dirt had become ground into the pores of the stone making it very difficult to clean effectively. Travertine does look amazing but does need to be sealed to keep it looking that way.

Travertine Kitchen Tiles Before Cleaning Helmdon
The first few photos show the floor before any cleaning was undertaken and the customers kitchen units which we had wrapped to protect against any splashing. We always take great carewhen working in peoples homes to avoid any damage and we advise that as much furniture as possible is removed from the area to be cleaned. In this case the client was unable to move the large table as they had nowhere to store it fortunately we carry specialist furniture sliders to allow us to move furniture backwards and forwards during cleaning so were able to work around it.

Travertine Kitchen Tiles Before Cleaning Helmdon Showing Pitting

Cleaning a stained Travertine tiled floor

The floor was cleaned using a combination of Tile Doctor Burnishing Pads and Tile Doctor Pro-Clean with a stiff brush to clean out embedded soil in the tile pits and grout lines, I also carried out some repairs to missing grout along the edges and around the oak beams to match the existing colours.

The Burnishing pads are applied individually to each tile in sequence starting with acoarse pad and finishing withthe fine pad. The floor is rinsed in-between each pad and the resulting residue extracted from the floor using a wet vacuum. The pads are encrusted with diamonds and are ideal for bringing back the finish of stone surfaces like Travertine.

Travertine Kitchen Tiles During Cleaning Helmdon
The picture above should give you an idea of the machinery required to achieve professional results.

Sealing a Travertine tiled floor

Before leaving for the day the floor was given a final rinse with water and as much water and moisture as possible was extracted from the floor using the wet vacuum. When we returned the next day the floor had dried and we were able to apply the sealer. On this occasion we used Tile Doctor Colour Grow was applied to both the Travertine tiles and the grout lines, not only will this protect both the tile and grout from staining Colour Grow also enhances the natural colour and beauty of the stone.

Travertine Kitchen Tiles After Cleaning Helmdon
The owner of the property was very happy with the result and left the following comment on the Tile Doctor feedback system, I always appreciate it when clients take the trouble to do that.

“Phil was at all times pleasant to talk to, professional in his approach and accommodating of our needs. Worked very well. Richard , Helmdon”

Travertine Kitchen Tiles After Cleaning Helmdon Close-Up

Source: Travertine Tile Cleaning & Restoration Service in Northamptonshire

Neglected Travertine Tiles Restored in Newton-Heath

This customer in Newton Heath, just outside of Manchester, used to have a beautiful polished travertine floor on most of the ground floor and bathroom but over time it was getting duller and duller as the polish became worn down, not helped I might add by their choice of cleaning products which were not appropriate for this type of floor. Additionally, numerous cracks and holes had appeared in their floor and worried it was going to get worse they decided to call in some professional help and get the whole floor fully restored.

Travertine Tiled Floor Before Cleaning and Sealing Newton Heath

When I got the call I went over to the house to take a in-depth look at the problem and recommended that the floor was burnished using diamond pads of different grades. They also asked if I could apply the same treatment to the travertine bathroom floor and shower cubicle as well, which I was very happy to do so we agreed a price and scheduled a date to do the work.

Travertine Kitchen Floor Before Cleaning and Sealing Newton Heath

Dull Travertine Floor Cleaning/Polishing

To start the burnishing process, I applied the Coarse 400 grit burnishing pad to the floor using rotary machine and water as lubrication to break down and remove any old sealer from the stone. When finished with first burnishing pad I removed all the soiled water left on floor with a wet vacuum. This removal process of soiled residue was repeated after each use of a burnishing pad.

Next, I moved on to the Medium 800 grit pad which is less coarse, but still rough enough to break down layers of ingrained dirt. I followed this up with the application of a Fine 1500 grit pad, which started to smooth down the rough areas of the surface to prepare the floor for a final polish with 3000 grit. However before moving straight on to the final of the four pads, I took the time to carefully fill in the all the small cracks and holes in the stone, before leaving the floor to dry until the next day.

Sealing Travertine Floor

The next morning, I returned to the property to finish off the floor restoration. As soon as I arrived I used a damp tester to make sure the floor was completely dry.

All was well so I went over the floor with the final Very Fine 3000 grit burnishing pad, this time without any water lubricant, to finally achieve a high quality polished finish.

For polished floors, we recommend the use an impregnating sealer that penetrates the pores of the stone rather than sitting on the surface of the floor, as this ensures the quality of the polish isn’t damaged. With this in mind I applied Tile Doctor Colour Grow to seal the tiles. This is a colour enhancing sealer that provides durable surface protection and allows the surface to breathe whilst enhancing the natural colours in the stone. At this point it’s important that any sealer that doesn’t penetrate the stone is removed by polishing it off with a cloth.

Travertine Tiled Floor After Cleaning and sealing Newton Heath

After this I went on to repeat the cleaning, polishing and sealing process on their Travertine Tiled shower cubicle but I’ll detail that in a separate post.

Needless to say, the customer was very happy with the work carried out on the floor and shower cubicle and recommended me to his neighbour straight away.

Travertine Bathroom Floor After Cleaning and sealing Newton Heath

 
 
Source: Travertine Tile Renovation and Restoration Service in Greater Manchester

Restoring a Well Worn Travertine Kitchen Floor

This customer, who lives in East Byfleet had been experiencing difficulties in keeping her fantastic Travertine tiled kitchen floor in good condition. Over the years it had suffered from a heavy build up of dirt and oily stains, not to mentioned a number of cracks and small holes. Needless to say, the customer was keen to restore the Travertine tiles to their former glory.

Travertine Kitchen Floor Before Cleaning East Byfleet Travertine Kitchen Floor Before Cleaning East Byfleet

Restoring Travertine Tiles

To begin the restoration, I applied Tile Doctor Remove and Go across the entirety of the large tiled area. This heavy duty remover breaks down any old sealers and other coatings, leaving the area ready to cleaned or, in this case, burnished.

Burnishing is a method for cleaning and polishing certain types of high-end stone, including Travertine, Marble, and Limestone. Our burnishing system involves the application of four diamond encrusted pads of varying grits. Firstly, I applied the Coarse grit pad, which helps to break down any dirt and stains on the surface of the tiles. Then, I worked my way through the Medium, Fine, and Very Fine pads, using a little water as lubricant, to gradually refine the polish on the Travertine. It was then rinsed and left to dry.

To round off the first day of work, I filled any cracks and holes using our two-part resin system which greatly improved the look of the tile.

Travertine Kitchen Floor Cracked Tile Before and After East Byfleet

Sealing Travertine Tiles

The following day I returned to the property to seal the tiles checking first that the floor had dried. All was well so I proceeded to seal the floor using our colour intensifying impregnating sealer Tile Doctor Colour Grow. Once that was dry, I added the finishing touches by buffing the floor with a soft white buffing pad. As you can see from the photographs, the combination of a fresh seal and polish worked wonders.

Travertine Kitchen Floor After Sealing East Byfleet

We did such a good job with the floor that the customer asked if we could also improve the appearance of their natural stone fireplace which was suffering from bad rust and oil stains however I do a separate write up on that.
 
 
Source: Travertine Tile Clearing and Polishing Service in Surrey

Maintaining And Polishing Travertine Tiles in Lincolnshire

This fantastic Travertine tiled kitchen floor was in a bad way. Not only had it not been treated to a proper clean and seal in a long while, but it has also suffered from natural pitting, leaving lots of little holes that damaged the overall appearance of the floor. Travertine is very aesthetic, but suffers from the drawback of being quite soft compared to other types of stone (typically it sits between 3-4 on the Moh’s scale of mineral hardness).

The customer, who lives in the town of Sleaford a small Lincolnshire market town, was keen to have the situation remedied through a complete restoration. This would need to include small repairs, along with a deep clean and a fresh seal.

Travertine Floor Before Refurbishment Sleaford Travertine Floor Before Refurbishment Sleaford

Cleaning and Burnishing a Travertine Tiled Floor

My first job was to deep clean the whole area, which I did using a solution of Tile Doctor Pro Clean and clean water. Pro Clean is a strong alkaline product which has a long history of producing reliable results of a wide range of natural stone floors, including Travertine, Granite, Limestone, and Slate. I applied the solution to both the tiles and the grout lines, and proceeded to scrub it in using a scrubbing pad fitted to a rotary floor machine.

This left the floor fresh and clean, but I would also need to restore the polish to the Travertine to really take its appearance to the next level. To do this I used the process known as burnishing, which essentially involves the consecutive application of different gritted pads to achieve a high quality polish on tiles. Our burnishing system, which consists of four pads, achieves fantastic results on high-end polished stone like Limestone, Marble and, of course, Travertine. I started by applying the Coarse grit burnishing pad, before gradually working my way through to the Medium, Fine, and finally Very Fine pads to achieve a brilliant shine and light reflection finish.

Travertine Floor After Deep Cleaning

To round off the first day of the restoration, I used a flexible matching filler to fill up any pitted holes present on the surface of the tiles. Following this, I installed a turbo dryer to make sure the floor would dry fully overnight, and be ready to seal the following day.

Sealing a Travertine Tiled Floor

The next day I returned to the property and proceeded to seal the Travertine tiles using several costs of Tile Doctor Colour Grow sealer to protect the tiles and also really enhance the natural colours in the stone. As an impregnating sealer, Colour Grow penetrates into the stone and fills its pores to safeguard it against ingrained dirt and stains from within.

Travertine Floor After Refurbishment Sleaford Travertine Floor After Refurbishment Sleaford

As you can see from the photographs, the combination of a deep clean, high quality polish and fresh seal really transformed the appearance of the floor from dull and lifeless to a really asset to the kitchen. The customer was absolutely delighted with the results, leaving the following feedback: “Very good job – delighted! Thank you Phil!”
 
 
Source: Travertine Tile and Grout Cleaning and Sealing Service in Lincolnshire

Polishing a Travertine Tiled Kitchen in Derbyshire

This customer had some real difficulty in getting their fantastic Travertine tiled kitchen area looking as good as it should. The cleaning methods they had previously employed were unable to prevent the tiles from appearing dull, and the customer was also unable to deal with the displeasing marks and small cracks damaging the stone.

Travertine Floor Before Burnishing in Ashbourne

Keen to get the floor back to looking its best, the customer called me down to their property, which overlooks the beautiful countryside area of Ashbourne, to see what could be done to restore the tiles.

Travertine Floor Before Burnishing in Ashbourne

Burnishing a Dull Travertine Tiled Floor

Upon my arrival at the property, I assessed the situation and resolved that the best way to restore the polish and general appearance of the floor was to use a process known as burnishing. The burnishing process, which involves the application of four diamond encrusted polishing pads of varying grit, works to grind away ingrained dirt while smoothing and polishing rough surfaces. Most commonly we use burnishing to restore the shine to Limestone and Marble tiles, but it can be used on most types of natural stone floor where a deep polish is required.

To start the process, I applied the Coarse 400 grit burnishing pad to the floor using a small amount of water as lubrication in order to break down and remove any old sealer from the stone. Once this had been done across the entirety of the floor, I removed any soiled water with a wet-vac machine; this removal of soiled residue was repeated after each use of a burnishing pad.

Next, I moved on to the Medium 800 grit pad which is less coarse than the 400 grit, but still rough enough still to break down layers of ingrained dirt. I followed this up with the application of a Fine 1500 grit pad, which started to smooth down the rough areas of the surface to prepare the floor for a final polish with an even finer burnishing pad later on. Before moving straight on to the final of the four pads, I took the time to carefully fill in the all of the small cracks and holes in the stone, before leaving the floor to dry until the next day.

Sealing a Travertine Tiled Floor

The next morning, I returned to the property to finish off the floor restoration. As soon as I arrived I used a damp tester to make sure the floor was completely dry. Noticing a number of small damp spots, I opted to use my heat gun to speed up the drying process.

Once the floor was completely dry, I used the Very Fine 3000 burnishing pad – the last of the four – without any lubricant to finally achieve a high quality polished finish. For polished floors it is recommended to use an impregnating sealer that penetrates into the pores of the stone rather than sitting on the surface of the floor, as this ensures the quality of the polish isn’t damaged.

As such I opted to use Tile Doctor Colour Grow to seal the tiles. This is a colour intensifying sealer that provides durable surface protection and allows the surface to breathe whilst enhancing the natural colours in the stone. It’s important that any sealer that doesn’t penetrate into the stone is removed by polishing it off with a cloth.

Travertine Floor After Burnishing in Ashbourne

After completing the seal, I went over the floor for a final time with the 3000 grit diamond burnishing pad to leave a smooth and shiny polished finish. Needless to say that the customer was very happy with result as they had never before been able to get the floor looking this good!
 
 
Source: Travertine Tile Cleaning and Polishing Service in Derbyshire

Repairing Cracks in Travertine Kitchen Tiles

This Travertine tiled kitchen floor had been laid around five years previously in a house in Didsbury and now most of the sealer had worn down making the floor difficult to clean effectively. This resulted in the tiles looking continually dirty and a few of the tiles had cracked which you can see in the photograph below.

Travetine Tiled Floor Before Burnishing Didsbury

Maintaining Travertine Tiles

To start off with i scrubbed Tile Doctor Pro-Clean into all the grout lines with a stiff brush in order to get them as clean as possible followed by a rinse with water which was extracted using a wet vacuum.

The next step was to strip the Travertine of any remaining sealer and dirt using a set of four Diamond encrusted burnishing pads which come in a number of grades and are applied from coarse to extra fine with a little water to help lubricate.

I used the first three pads from coarse to fine rinsing between each pad to restore the polished finish of the stone but stopped before applying the final pad so I could fill all the cracked tiles with a resin filler in a matching shade. Once the filler had dried I gave the floor a final polish with the fourth extra fine burnishing pad and gave the floor a final rinse at the end to make sure the floor was clean before sealing.

Cracked Travertine Didsbury Repair

Sealing Travertine Tiles

Once the floor was dry it was sealed using a couple of coats of Tile Doctor Colour Grow which is an impregnating sealer that occupies the pores in the stone so dirt cannot become ingrained there. This particular sealer also enhances the natural colours in the stone.

Travetine Tiled Floor After Burnishing Didsbury

After the final polish and sealing the cracked areas had blended in very nicely and the customer was very pleased with the overall result.
 
 
Source: Travertine Floor Restoration Service in Manchester

Changing the Sealer on Limestone Patio Tiles

Another quick job here in Cheshire, this time in the town of Wilmslow. Much like Alderly Edge, where I recently completed another job, Wilmslow is an affluent area known for its upmarket lifestyle and as a popular option for residence amongst celebrities and famous figures. In fact it is currently, and has previously been, home to several Premier League footballers from the nearby clubs Manchester United and Manchester City.

This job was another case of where a tiled floor had lost its shine due to the sealer wearing away over time. In this instance, my client had a Travertine tiled floor in her kitchen that she wanted to me to restore back to looking at its best.

Travertine Tiled Floor Before Refurbish Wilslow Travertine Tiled Floor Before Refurbish Wilslow

Travertine is a fantastic natural stone which possesses unique features that no other stone can offer. It offers a particularly distinctive design style, making it a popular choice both for commercial and residential use. Many homeowners use Travertine tiles for kitchen flooring, bathroom walls and floors and for external floors, such as patios.

Removing the old sealer

The process of stripping off old sealer can be done effectively and relatively quickly without using a liquid stripper. The best method is to use a series of fine diamond encrusted burnishing pads, which is exactly what I did in this case. The burnishing pads are applied in sequence from coarse, medium, fine and superfine to remove the old sealer without damaging the Travertine and then re-polish to a lovely polished shine.

Applying a new sealer for protection and colour enhancement

One the floor had been burnished, rinsed and dried; I proceeded to re-seal the floor with Tile Doctor Colour Grow. Colour Grow is particularly effective when to seal porous natural stone surfaces such as Travertine and Limestone, whether internal or external. This is because the product is specially formulated to penetrate deep into the pores of the stone, providing durable surface protection from within.

The other key benefit of Colour Grow is that it intensifies the colours within the stone, as you can from the photos. This adds additional character and flair to already impressive household features like this Travertine floor.

Travertine Tiled Floor After Refurbish Wilslow Travertine Tiled Floor After Refurbish Wilslow

The finished results were exactly what my client had hoped for. It goes to show that with the right methods and know-how such a big difference can be made to the appearance of tiled floors. I was very happy to help.
 
 
Source: Professional Tile, Stone and Grout cleaning services in North-Cheshire

Repairing Cracked Travertine Tiles with Stone Filler

Every now and again, I get a call from a client located on the small peninsula of Sandbanks, Poole. Sandbanks, sometimes referred to as ‘Britain’s Palm Beach’, is known for its fantastic beach and high value property. My client asked me to take a look at a Travertine floor in his kitchen which was, in fact, more highly polished than he had wanted. The polished finish had worn off the travertine tiles where they had been walked on, leaving a dull trackway running down the centre of the kitchen. With its distinct characteristics, travertine is a popular choice for kitchen flooring, although it is also quite often used in bathrooms. In any case Travertine tiles will need regular maintenance to keep them looking their best.

Travertine tiled floor before cleaning in Sandbanks

Unfortunately, the kitchen floor must have experienced some sort of settlement or shrinkage as a long crack has appeared, which ran along the same line as the dull trackway. It is not uncommon for Travertine tiles to crack due to wear over time, or even bad fitting in some cases. While the exact cause of the crack was unclear, the homeowner concluded that the floor was certainly in need of restoration.

Repairing a crack in a Travertine tiled floor

Replacing the Travertine tiles was not an option due to a lack of spare tiles, so I opted instead to fill the crack in the floor using Harbro Stone Filler, an epoxy stone filler, matching the colour of the tile as closely as possible. I left this to set, before sanding down the excess filler.

My next action was to use a set of Tile Doctor Diamond burnishing pads to sand out any scratches and restore a more even shine to the floor, as per the client’s request. For polished stone, I recommend using a set of four burnishing pads applied in order: Coarse, Medium, Fine, and Very Fine. I used these one after the other with a little water to lubricate and restore the surface polish to the desired level.

Sealing a Travertine tiled floor

The next day, I returned to seal the floor with a couple of coats of Tile Doctor Colour Grow sealer. Colour Grow is a colour enhancing, impregnating sealer which penetrates deeply into the pores of the stone, thereby preventing dirt from becoming ingrained within. This particular sealer also enhances the natural colours within the Travertine tile, whilst also providing long term durable protection.

Travertine tiled floor after cleaning in Sandbanks

Although the crack could not be made to disappear completely, its appearance was much improved. The customer was also very pleased with the long-lasting lower sheen provided, describing it as “the finish I had wanted in the first place when the tiles were fitted”.
 
 
Source: Professional Tile, Stone and Grout Cleaning service in Dorset

Holes in Travertine Cleaned, Filled and Sealed

This Travertine tiled floor installed in the kitchen of a house in Holmes Chapel was proving impossible to clean and this was compounded by the fact that black dirt had become trapped in the natural holes in the Travertine.

Travertine tiled kitchen floor Holmes Chapel Before

Cleaning Travertine Floor Tiles

The floor was given a wash with Tile Doctor Neutral Cleaner to remove any surface grit and this was followed by the application of the Tile Doctor burnishing system which involves the use of a set of four Burnishing pads fitted to a rotary machine. There are four pads and you start off with a course stripper pad with a little just water and then carry on with the finer pads until the floor is thoroughly cleaned and any previous sealer removed. The next step was to use Tile Doctor Pro-Clean along the grout lines with a stiff brush to get the grout cleaner and also around the holes in the travertine where dirt had become ingrained. Once the small holes were clean they were then filled with a matching coloured grout.

To bring up the polish on the Travertine tile the last of the four burnishing pads was applied with gives a final polish.

Travertine tiled kitchen floor Holmes Chapel After

Sealing Travertine Floor Tiles

To seal the floor and protect it from staining two coats of Tile Doctor Colour Grow was applied; Colour Grow is a colour enhancing sealer which enhanced the natural colours in the stone. Once dry the last step was to buff the floor to a nice shine with a rotary machine fitted with a white pad.
 
 
Source: Resolving Travertine issues in Cheshire

Burnishing Travertine Tiled Floors

This Travertine Tiled Floor was laid in an open plan Kitchen in West Didsbury, Manchester, hopefully you will be able to see from the photographs it was in need a regular clean and re-seal.

Dirty Travertine Before Dirty Travertine Before photo

Cleaning and Polishing Travertine Tile

I gave the Travertine tiles a quick clean with a weak dilution of Tile Doctor Pro-Clean to remove any loose surface dirt and this was rinsed off with clean water before starting with a set of Burnishing pads. The Burnishing system we use has four different coloured pads and they fit to a rotary machine. you work your way through them together with a little water one by one until the floor is thoroughly cleaned and polished.

Sealing Travertine Tile

When the Travertine tile was dry it was sealed with two coats of Tile Doctor Colour Grow which is a colour intensifying sealer that provides durable surface protection.

Travertine Floor After Travertine Floor After

 
 
Source: Travertine Tile Floor Maintenance in Manchester